128x64 Pantalla Gráfica OLED - REX012864D
128x64 Pantalla Gráfica OLED - REX012864D
128x64 Pantalla Gráfica OLED - REX012864D
128x64 Pantalla Gráfica OLED - REX012864D
128x64 Pantalla Gráfica OLED - REX012864D
128x64 Pantalla Gráfica OLED - REX012864D
128x64 Pantalla Gráfica OLED - REX012864D

128x64 Pantalla Gráfica OLED

Model No. REX012864D

REX012864D es una pantalla gráfica OLED de matriz de puntos de 128x64 con una diagonal de 0.96 pulgadas. La estructura de este OLED de 128 x 64 es COG con el IC controlador SSD1306 integrado. Hay opciones de interfaz para que los clientes elijan, incluyendo 8 bits 6800 (por defecto), 8 bits 8080, SPI de 3/4 hilos e I2C.

La pantalla OLED no requiere retroiluminación ya que emite luz por sí misma, lo que permite que la pantalla OLED sea delgada y ligera. Otras características como la alta relación de contraste, bajo consumo de energía, etc., son razones por las cuales esta pequeña pantalla OLED es adecuada para dispositivos portátiles. Los colores de emisión disponibles son blanco, amarillo y azul.

Dos características clave de la pantalla son el convertidor DC/DC elevador integrado y el suministro externo de VCC. El voltaje de alimentación lógica varía de 2.8V a 3.3V, con un valor típico de 3.0V. El rango de temperatura de funcionamiento del módulo va desde -40°C hasta +80°C; el rango de temperatura de almacenamiento abarca desde -40°C hasta +85℃. La serie de pantallas OLED REX012864D de 128x64 ofrece diferentes tipos de FPC como ZIF y Hotbar FPC.

Ref. de la fuente de datos: REX012864DWPP3N00003

AÑADIR A PREGUNTA/Demo Code DESCARGAR PDF DESCARGAR PDF anterior PREV. SIGUIENTE
  • Especificación
  • Función Interfaz Pin
  • Dibujo del Contorno
  • Valores Nominales Máximos Absolutos
  • Características electrónicas
  • Opciones
Elemento Dimensión Unidad
Estructura COG
Tamaño (Diagonal) 0.96 pulgada
Matriz de puntos (Resolución) 128 × 64 dots
Dimensión del módulo 26.7 × 19.26 × 1.26 mm
Área de visión 23.938 × 12.058 mm
zona activa(AA) 21.738 × 10.858 mm
Tamaño del punto 0.148 × 0.148 mm
Distancia entre puntos 0.17 × 0.17 mm
Color de Emisión OLED, Blanco / Amarillo / Azul
Modo de visualización Matriz Pasiva
IC SSD1306
Interfaz 6800, 8080, SPI, I2C
Fuente de alimentación 3V
Deber 1/64 Deber
Temperatura de funcionamiento -40~+80 °C
Temperatura de almacenamiento -40~+85 °C
Tipo de polarizador Polarizador opcional
Opciones de FPC Sí
Tipo Pantalla Gráfica OLED
No. Símbolo Función
1 N.C. (GND) Reserved Pin (Supporting Pin)
The supporting pins can reduce the influences from stresses on the function pins. These pins must be connected to external ground.
2 C2N Positive Terminal of the Flying Inverting CapacitorNegative Terminal of the Flying Boost CapacitorThe charge-pump capacitors are required between the terminals. They must be floated when the converter is not used.
3 C2P
4 C1P
5 C1N
6 VBAT Power Supply for DC/DC Converter Circuit
This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used.
7 NC NC
8 VSS Ground of Logic Circuit
This is a ground pin. It acts as a reference for the logic pins. It must be connected to external ground.
9 VDD Power Supply for Logic
This is a voltage supply pin. It must be connected to external source.
10 BS0 Communicating Protocol Select
These pins are MCU interface selection input. See the
following table:
  BS0 BS1 BS2
I2C 0 1 0
3-wire SPI 1 0 0
4-wire SPI 0 0 0
8-bit 68XX Parallel 0 0 1
8-bit 80XX Parallel 0 1 1
11 BS1
12 BS2
13 CS# Chip Select
This pin is the chip select input. The chip is enabled for MCU communication only when CS# is pulled low.
14 RES# Power Reset for Controller and Driver
This pin is reset signal input. When the pin is low, initialization of the chip is executed.
15 D/C# Data/Command Control
This pin is Data/Command control pin. When the pin is pulled high, the input at D7~D0 is treated as display data.
When the pin is pulled low, the input at D7~D0 will be transferred to the command register. For detail relationship to MCU interface signals, please refer to the Timing Characteristics Diagrams.
When the pin is pulled high and serial interface mode is selected, the data at SDIN is treated as data. When it is pulled low, the data at SDIN will be transferred to the command register. In I2C mode, this pin acts as SA0 for slave address selection.
16 R/W# Read/Write Select or Write
This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Pull this pin to “High” for read mode and pull it to “Low” for write mode.
When 80XX interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled low and the CS# is pulled low.
17 E/RD# Read/Write Enable or Read
This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled high and the CS# is pulled low.
When connecting to an 80XX-microprocessor, this pin receives the Read (RD#) signal. Data read operation is initiated when this pin is pulled low and CS# is pulled low.
18~25 D0~D7 Host Data Input/Output Bus
These pins are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus. When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK. When I2C mode is selected, D2 & D1 should be tired together and serve as SDAout & SDAin in application and D0 is the serial clock input SCL.
26 IREF Current Reference for Brightness Adjustment
This pin is segment current reference pin. A resistor should be connected between this pin and VSS. Set the current lower than 12.5μA.
27 VCOMH Voltage Output High Level for COM Signal
This pin is the input pin for the voltage output high level for COM signals. A capacitor should be connected between this pin and VSS.
28 VCC Power Supply for OEL Panel
This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used.
29 VLSS Ground of Analog Circuit
This is an analog ground pin. It should be connected to VSS externally.
30 NC
(GND)		 Reserved Pin (Supporting Pin)
The supporting pins can reduce the influences from stresses on the function pins. These pins must be connected to external ground.

REX012864D with Hotbar FPC

128x64 Pantalla Gráfica OLED - REX012864D

 

REX012864D with ZIF FPC

128x64 Pantalla Gráfica OLED - REX012864D

Parámetro Símbolo mínimon Máximo Unidad
Tensión de Alimentación para lógica VDD 0 4.0 V
Tensión de alimentación de la pantalla VCC 0 15.0 V
Temperatura de funcionamiento TOP -40 +80 °C
Temperatura de almacenamiento TSTG -40 +85 °C
Artículo Símbolo Condición mínimo Típico Máximo Unidad
Tensión de Alimentación para lógica VDD － 2.8 3.0 3.3 V
Tensión de alimentación de la pantalla VCC － 11.5 12.0 12.5 V
Entrada de alto tensión VIH － 0.8×VDD － VDDIO V
Entrada de baja tensión VIL － 0 － 0.2×VDD V
Alta tensión de salida VOH － 0.9×VDD － VDDIO V
Baja tensión de salida VOL － 0 － 0.1×VDD V
Operating Current for VCC (50% display ON)  ICC Vcc =12V － 16 20 mA

FPC Opciones

Dibujo FPC Longitud PIN Pitch ZIF / HOTBAR FPC interfaz FPC No. Fecha de creación
 FPC2070003001XXXXX08_REX012864D 22 30 0.7 HOTBAR 6800,8080,SPI,I2C FPC2070003001XXXXX08 20170808
 FPC2050003011XXXXX28_REX012864D 41.1 30 0.5 ZIF  6800,8080,SPI,I2C FPC2050003011XXXXX28 20180604
 FPC2050003011XXXXX34_REX012864D 13.1 30 0.5 ZIF  6800,8080,SPI,I2C FPC2050003011XXXXX34 20200221

Related Products

Top