- General Specifications
- Interface Pin Function
- Contour Drawing
- Other Specifications
Item | Dimension | Unit |
---|---|---|
Size (Diagonal) | 3.5 | inch |
Dot Matrix / Resolution | 320 × RGB × 240(TFT) | dots |
Module Dimension | 100.0(W) × 66.1(H) × 7.23(D) | mm |
Active Area | 70.08 × 52.56 | mm |
Dot / Pixel Pitch | 0.073 × 0.219 | mm |
LCD Type | TFT, Normally Black, Transmissive | |
View Direction | 12 o’clock | |
Aspect Ratio | 4:3 | |
Interface (System) | UART | |
Protocol | Customized UART | |
MCU | ITE9866 | |
Touch Panel | Without Touch Screen | |
Surface | Anti-Glare | |
Brightness | 350min, 420typ | cd/㎡ |
Operating voltage | 5 | Vdc |
Flash Memory Size | 16 | MB |
SDRAM Frequency | Up to 800MHz internal MCU | Mhz |
Operating Temperature | -20~+70 | °C |
CON2 definition:
Pin | Symbol | Function |
---|---|---|
1 | GND | Power Ground |
2 | UART_TX | UART TX |
3 | UART_RX | UART RX |
4 | +5V | Power supply 5V |
5 | D+ | USB Data+ |
6 | D- | USB Data- |
7 | GND | Power Ground |
8 | /REST | Reset (active Low) |
9 | GND | Power Ground |
10 | PWM | Pulse width modulation |
11 | GND | Power Ground |
12 | +5V | Power supply : 5V |
CON3 definition:
Pin | Symbol | Function |
---|---|---|
1 | GND | Power Ground |
2 | SW1 | Switch ( active low) |
3 | SW2 | Switch ( active low) |
4 | SW3 | Switch ( active low) |
5 | SW4 | Switch ( active low) |
6 | GND | Power Ground |
7 | NC | Reserved |
8 | NC | Reserved |
9 | NC | Reserved |
10 | NC | Reserved |
11 | INT | Interrupt output for CTP or external switch |
12 | +5V | Power supply : 5V |
Absolute Maximum Ratings
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operating Temperature | TOP | -20 | - | +70 | ℃ |
Storage Temperature | TST | -30 | - | +80 | ℃ |
Electrical Characteristics
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Supply Voltage | VCC | 4.5 | 5 | 5.5 | V |
Supply Current | ICC | - | 340 | mA |
Bom
Item | Description |
---|---|
LCM | RFC350L-AIW-DNN |
PCBA | SV10003R500LA00N0100 |