4.3 inch 480×272 UART TFT LCD Display with PACP - RL0F00043000UGFAAEA00
4.3 inch 480×272 UART TFT LCD Display with PACP - RL0F00043000UGFAAEA00

4.3 inch 480×272 UART TFT LCD Display with PACP

Model No. RL0F00043000UGFAAEA00

1.DC 5V working voltage.
2.UART Interface with customized UART protocol, default baud rate at 19200 bit/Sec.
3.Built in 16MB flash memory.
4.Supports PCAP touch screen.
5.RL0F00043000UGFAAEA00 is defined as a slave device, which is controlled by master device via customized command to render display content on the display screen and return touch event position.

》Link Entry Level UART Display User Guide Video

Inquiry or Demo Code Datasheet Back Previous
  • General Specifications
  • Interface Pin Function
  • Contour Drawing
  • Other Specifications
Item Dimension Unit
Size (Diagonal) 4.3 inch
Dot Matrix / Resolution 480 × RGB × 272(TFT) dots
Module Dimension 125.5(W) × 67.2(H) × 9.35(D) mm
Viewing Area 96.24 × 54.66 mm
Active Area 95.04 × 53.856 mm
Dot / Pixel Pitch 0.066 × 0.198 mm
LCD Type TFT, Normally White, Transmissive
View Direction 12 o’clock
Aspect Ratio 16:9
Control Board Yes
System Interface UART
Protocol Customized UART
MCU IT9866
Detect Points 1 Points
Touch Panel Projected Capacitive Touch Screen, PCAP
Surface Glare
Brightness 400min, 480typ cd/㎡
Operating voltage 5 Vdc
Flash Memory Size 16 MB
SDRAM Frequency 16MB/ 360MHz Mhz
Operating Temperature -20~+70 °C

CON2 definition:

Pin Symbol Function
1 GND Power Ground
2 UART_TX UART TX
3 UART_RX UART RX
4 +5V Power supply 5V
5   D+ USB Data+
6 D- USB Data-
7 GND Power Ground
8 /REST Reset (active Low)
9 GND Power Ground
10 PWM Pulse width modulation 
11 GND Power Ground
12 +5V Power supply : 5V

CON3 definition:

Pin Symbol Function
1 GND Power Ground
2 SW1 Switch ( active low)
3 SW2 Switch ( active low)
4 SW3 Switch ( active low)
5   SW4 Switch ( active low)
6 GND Power Ground
7 NC Reserved
8 NC Reserved
9 NC Reserved
10 NC Reserved
11 INT Interrupt output for CTP or external switch
12 +5V Power supply : 5V

4.3 inch 480×272 UART TFT LCD Display with PACP - RL0F00043000UGFAAEA00

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Min Typ Max Unit
Supply Voltage VCC 4.5 5 5.5 V
Supply Current ICC - 340   mA

Bom

Item Description
LCM RFE43BU-AIW-DNG
PCBA SV10004R300UA00N0100
Top