0.96 吋 128x64 COG 繪圖型 OLED 顯示器模組（ST7315 IC）- REX012864AD
0.96 吋 128x64 COG 繪圖型 OLED 顯示器模組（ST7315 IC）- REX012864AD
0.96 吋 128x64 COG 繪圖型 OLED 顯示器模組（ST7315 IC）- REX012864AD

0.96 吋 128x64 COG 繪圖型 OLED 顯示器模組（ST7315 IC）

Model No. REX012864AD

REX012864AD 是一款 0.96 吋 COG 繪圖型 被動矩陣 OLED 顯示器模組，具備 128×64 解析度與 21.74 × 10.86 mm 的可視區域，提供銳利且高對比的顯示效果，非常適合用於嵌入式系統、手持裝置及控制介面。該模組內建 ST7315 控制器 IC，支援 6800、8080、SPI 及 I2C 等多種介面，適用於各類專案與應用。可選發光顏色為黃色與白色。

為提升耐用性，REX012864AD 可在 -40°C 至 +80°C 的溫度範圍內運作，並能承受 -40°C 至 +85°C 的儲存條件。其纖薄的 26.70 × 19.26 × 1.26 mm 外型，特別適合小型或微型的應用專案。

若您需要關於 REX012864AD 或其他 0.96 吋 I2C OLED 顯示模組的技術支援或產品報價，歡迎與我們的銷售團隊聯繫！

規格來源: REX012864ADWPP3N00000

產品詢問 規格書下載 回上頁 上一個產品 下一個產品
  • 一般規格
  • Pin 功能定義
  • 規格圖
  • 最大絕對額定值
  • 電氣特性
  • 影片
項目 規格內容 單位
結構 COG
對角線尺寸 0.96 吋
點陣/解析度 128 × 64 dots
模組尺寸 26.7 × 19.26 × 1.26 mm
可視區域(VA) 23.94 × 12.06 mm
有效區域(AA) 21.74 × 10.86 mm
點(像素)大小 0.15 × 0.15 mm
點(像素)間距 0.17 × 0.17 mm
發光色 OLED, 白色 / 黃色
支援灰階 無
顯示模式 被動矩陣（Passive Matrix）
IC ST7315
介面 8080 / 6800 / SPI / I2C
電源電壓 3V
驅動方式(Duty) 1/64
工作溫度 -40~+80 °C
儲存溫度 -40~+85 °C
偏光片類型(Polarizer Type) 可選偏光鏡
類型 繪圖型OLED顯示器
Pin No. 符號 功能說明
1 N.C. (GND) The supporting pins can reduce the influences from stresses on the function pins. These pins must be connected to external ground.
2 C2N DC/DC voltage converter.
Connect a capacitor between CA1P and CA1N.
Connect a capacitor between CA2P and CA2N.
3 C2P
4 C1P
5 C1N
6 VBAT Analog power for internal booster. If VDD=VABT
7 NC NC
8 DGND Digital ground. Connect to GND 
9 VDD Power supply pin for core logic operation.
10 IF0 These pins select interface operation mode.
IF2 IF1 IF0 MPU interface type
L L L 4-line serial interface
L L H 3-line serial interface
L H L I2C serial interface
H H L 8-bit 8080 parallel interface
H L L 8-bit 6800 parallel interface
11 IF1
12 IF2
13 CSB Chip select input pin.
CSB=“L”: This chip is selected and the MPU interface is active.
CSB=“H”: This chip is not selected and the MPU interface is disabled (D[7:0] are high impedance).
14 RSTB This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation.
15 A0 It determines whether the access is related to data or command.
A0 = "H": Indicates that D[7:0] are display data;
A0 = "L": Indicates that D[7:0] are control data.
This pin is I2C slave address bit (SA0), when I2C interface is selected.
16 RWR Read / Write execution control pin. (This pin is only used in parallel interface)
MPU Type RWR Description
6800-series R/W Read / Write control input pin
R/W = "H" : read
R/W = "L" : write
8080-series /WR Write enable input pin.
The data are latched at the rising edge of the /WR signal.

This pin is not used in serial interfaces and should be connected to DGND.
17 ERD Read / Write execution control pin. (This pin is only used in parallel interface)
MPU Type ERD Description
6800-series E Read / Write control input pin.
R/W = "H": When E is "H", data bus is in output status.
R/W = "L": The data are latched at the falling edge of the E signal.
8080-series /RD Read enable input pin.
When /RD is "L", data bus is in output status.

This pin is not used in serial interfaces and should be connected to DGND.
18~25 D0~D7 When using 8-bit parallel interface: 8080 or 6800 mode 8 bit bi-directional data bus. Connect to the data bus of 8-bit microprocessor. When CSB is “H”, D[7:0] are high impedance. When using serial interface : 3-line SPI or 4-line SPI mode
D[2:1] : serial input/output data (SDA).
D[0] : serial input clock (SCL).
D1 to D2 must be connected together (SDA)
D[7:3] : fix to “L” by DGND. When using serial interface : I2C interface
D[2] : SDA_OUT, serial data and acknowledge output for the I2C interface.
D[1] : SDA_IN, serial input data
D[0] : SCL, serial input clock .
D1 to D2 must be connected together (SDA)
D[7:3] : fix to “L” by DGND.
26 IREF Internal IREF is used, please leave this pin open.
27 VCOMH VCOMH is the driving voltage for common and segment circuits.
28 VOLED VOLED is the diving voltage for segment circuit.
29 PGND Analog ground. Connect to GND
30 NC
(GND)		 The supporting pins can reduce the influences from stresses on the function pins. These pins must be connected to external ground.

0.96 吋 128x64 COG 繪圖型 OLED 顯示器模組（ST7315 IC）- REX012864AD 規格圖

參數 符號 最小值 最大值 單位
邏輯電源電壓 VDD -0.3 5.5 V
顯示電源電壓 VOLED 0 18.0 V
工作溫度 TOP -40 +80 °C
儲存溫度 TSTG -40 +85 °C
項目 符號 條件 最小值 典型值 最大值 單位
邏輯電源電壓 VDD － 2.4 3.0 5.0 V
顯示電源電壓
(Supplied Externally)		 VOLED － 7.5 12.0 16.5 V
電荷幫浦穩壓器電源電壓 VBAT － 3.0 3.5 5.0 V
顯示器的電荷幫浦輸出電壓 (Generated by Internal DC/DC) Charge Pump
VOLED		 － 7.0 7.5 － V
輸入高準位 VIH － 0.8×VDD － － V
輸入低準位 VIL － － － 0.2×VDD V
輸出高準位 VOH － 0.9×VDD － － V
輸出低準位 VOL － － － 0.1×VDD V
Display 50% Pixel on
Operating Current for VOLED
(VOLED Supplied Externally)		 IOLED VOLED=12V － 6 12 mA
Display 50% Pixel on (VOLED Generated by Internal DC/DC) IBAT VBAT=3.5V － 15 30 mA

REX012864AD - 0.96吋 COG OLED 顯示器模組展示影片

 

相關產品

Top