2,42 Zoll Grafik-OLED-Anzeigemodule 128x64 Punkte (COG+Frame) - REH012864G
2,42 Zoll Grafik-OLED-Anzeigemodule 128x64 Punkte (COG+Frame) - REH012864G
2,42 Zoll Grafik-OLED-Anzeigemodule 128x64 Punkte (COG+Frame) - REH012864G
2,42 Zoll Grafik-OLED-Anzeigemodule 128x64 Punkte (COG+Frame) - REH012864G
2,42 Zoll Grafik-OLED-Anzeigemodule 128x64 Punkte (COG+Frame) - REH012864G

2,42 Zoll Grafik-OLED-Anzeigemodule 128x64 Punkte (COG+Frame)

Model No. REH012864G

REH012864G ist ein Punktmatrix-128x64-COG-OLED-Grafikdisplay / Grafikmodul / OLED Anzeige / OLED-Display mit einem Rahmen. Die Größe des aktiven Bereichs beträgt 2,42 Zoll in der Diagonale, mit Modulabmessungen von 77,2x42,14 mm. Dieses 2,42 Zoll OLED-Modul verfügt über den integrierten IC SSD1309 und bietet ein hohes Kontrastverhältnis von 10.000:1. Es stehen viele Schnittstellenoptionen zur Auswahl, darunter 6800/8080, 4-Draht-SPI und I2C-Schnittstelle. Das Modul arbeitet in einem Temperaturbereich von -40°C bis +80°C; der Temperaturbereich für die Lagerung beträgt -40°C bis +85°C.

Die logische Versorgungsspannung liegt im Bereich von 2,8V bis 3,3V, wobei der typische Wert 3V beträgt. Die verfügbaren Emissionsfarben sind Weiß, Gelb, Grün und Himmelblau. Wenn Sie weitere Informationen wünschen, senden Sie uns gerne eine Anfrage.

Datenquelle-Referenz : REH012864GWPP3N00000

Zu Anfrage hinzufügen/Demo Code PDF-Download zurück Zurück Weiter
  • Allgemeine Spezifikationen
  • Schnittstelle Pin-Funktion
  • Zeichnung
  • Absolute Grenzwerte
  • Elektrische Eigenschaften
Artikel Ausmaß Einheit
Bauweise COG + Frame
Größe (Diagonale) 2.42 Zoll
Punktmatrix (Auflösung) 128 × 64 Punkte
Abmaße der modul 77.2 × 42.14 × 3.40 mm
Anzeigebereich (VA) 57.01 × 28.91 mm
Aktiver Bereich (AA) 55.01 × 27.49 mm
Punktgröße 0.40 × 0.40 mm
Punktabstand 0.43 × 0.43 mm
Emittierende Farbe OLED, Weiß / Gelb / Grün / Himmelblau
der Anzeigemodus Passive Matrix
IC SSD1309
Schnittstelle 6800,8080,4-Wire SPI,I2C
Stromversorgung 3V
Duty 1/64 duty
Betriebstemperatur -40~+80 °C
Lagertemperatur -40~+85 °C
Polarizer Type Polarizer optional
Typ OLED-Grafikdisplay / Grafikmodul / OLED Anzeige / OLED-Display
No. Symbol Funktion
1 NC(GND) No connection
2 VSS Ground.
3-10 NC No connection
11 VDD Power supply pin for core logic operation
12 BS1 MCU bus interface selection pins. Select appropriate logic setting as described in the following table. BS2 and BS1 are pin select
  BS1 BS2
I2C 1 0
4-wire Sereial 0 0
8-bit 68XX Parallel 0 1
8-bit 80XX Parallel 1 1
Note
(1) 0 is connected to VSS
(2) 1 is connected to VDD
13 BS2
14 NC No connection
15 CS# This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).
16 RES# This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
17 D/C# This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
In I2C mode, this pin acts as SA0 for slave address selection.
18 R/W# This pin is read / write control input pin connecting to the MCU interface.
When 6800 interface mode is selected, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH and write mode when LOW.
When 8080 interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled LOW and the chip is selected.
When serial or I2C interface is selected, this pin must be connected to VSS.
19 E/RD# This pin is MCU interface input.
When 6800 interface mode is selected, this pin will be used as the Enable (E) signal.
Read/write operation is initiated when this pin is pulled HIGH and the chip is selected.
When 8080 interface mode is selected, this pin receives the Read (RD#) signal. Read operation is initiated when this pin is pulled LOW and the chip is selected.
When serial or I2C interface is selected, this pin must be connected to VSS.
20~27 D0~D7 These pins are bi-directional data bus connecting to the MCU data bus.
Unused pins are recommended to tie LOW.
When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
28 IREF This pin is the segment output current reference pin.
IREF is supplied externally.
29 VCOMH COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
30 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
31 NC(GND) No connection

2,42 Zoll Grafik-OLED-Anzeigemodule 128x64 Punkte (COG+Frame) - REH012864G

Parameter Symbol Mindestwert Maximalwert Einheit
Supply Voltage for Logic VDD -0.3 4 V
Supply Voltage for Display VCC 0 15 V
Betriebstemperatur TOP -40 +80 °C
Lagertemperatur TSTG -40 +85 °C
Artikel Symbol Bedingung Mindestwert typischer Wert Maximalwert Einheit
Supply Voltage for Logic VDD － 1.65 3.0 3.3 V
Supply Voltage for Display VCC － 7.0 13.0 13.5 V
High Level Input VIH － 0.8×VDD － VDD V
Low Level Input VIL － 0 － 0.2×VDD V
High Level Output VOH － 0.9×VDD － VDD V
Low Level Output VOL － 0 － 0.1×VDD V
Display 50% Pixel on ICC VCC =13V － 18 27 mA

Related Products

Top