2,42-Zoll 128x64 COG Grafik-OLED-Displaymodul (SH1106 IC) - REX012864AL
2,42-Zoll 128x64 COG Grafik-OLED-Displaymodul (SH1106 IC) - REX012864AL
2,42-Zoll 128x64 COG Grafik-OLED-Displaymodul (SH1106 IC) - REX012864AL
2,42-Zoll 128x64 COG Grafik-OLED-Displaymodul (SH1106 IC) - REX012864AL

2,42-Zoll 128x64 COG Grafik-OLED-Displaymodul (SH1106 IC)

Model No. REX012864AL

Das REX012864AL ist ein 2,42-Zoll-128×64-COG-Passivmatrix-Grafik-OLED-Displaymodul. Dieses OLED-Modul verwendet den SH1106-IC, unterstützt mehrere Kommunikationsschnittstellen (I2C, SPI, 6800, 8080), bietet hohe Kontrastleistung und geringen Stromverbrauch. Mit einer aktiven Anzeigefläche von 55,01 × 27,49 mm und einem 1/64-Tastverhältnis liefert es gestochen scharfe monochrome Bilder.

Für Zuverlässigkeit entwickelt, arbeitet das REX012864AL in extremen Umgebungen mit einem breiten Temperaturbereich von -40 °C bis +80 °C. Der geringe Stromverbrauch und das schlanke Profil von nur 2,01 mm machen es ideal für Smart-Home-Anwendungen, tragbare Geräte, POS-Systeme, medizinische Instrumente und andere eingebettete Systeme.

Wenn Sie technischen Support oder ein Angebot für das REX012864AL oder andere SH1106-OLED-Displaymodule benötigen, wenden Sie sich bitte an unser Vertriebsteam.

Datenquelle-Referenz：REX012864ALWPP3N00000

Zu Anfrage hinzufügen/Demo Code PDF-Download zurück Zurück Weiter
  • Allgemeine
  • Schnittstelle Pin-Funktion
  • Zeichnung
  • Absolute Maximum Ratings
  • Electrical Characteristics
Artikel Ausmaß Einheit
Bauweise COG
Größe (Diagonale) 2.42 Zoll
Punktmatrix (Auflösung) 128 × 64 Punkte
Abmaße der modul 60.5 × 37.0 × 2.01 mm
Anzeigebereich (VA) 57.01 × 28.91 mm
Aktiver Bereich (AA) 55.01 × 27.49 mm
Punktgröße 0.40 × 0.40 mm
Punktabstand 0.43 × 0.43 mm
Emittierende Farbe Weiß / Gelb
der Anzeigemodus Passive Matrix
IC SH1106
Schnittstelle I2C,4-line SPI,8-bits 6800 or 8080 parallel
Stromversorgung 3V
Duty 1/64 duty
Betriebstemperatur -40~+80 °C
Lagertemperatur -40~+85 °C
Typ OLED-Grafikdisplay / OLED Anzeige / OLED-Display
Pin No. Symbol Beschreibung
1 ESD_GND ESD Ground pin
2 VSS Ground.
3-10 NC No connection
11 VDD1 Power supply input
12 IM1 These are the MPU interface mode select pads.
  8080 I2C 6800 4-wire SPI
IM1 1 1 0 0
IM2 1 0 1 0
Note
(1) 0 is connected to VSS
(2) 1 is connected to VDD1
13 IM2
14 NC No connection
15 CS# This pad is the chip select input. When CS# = “L”, then the chip select becomes active, and data/command I/O is enabled.
16 RES# This is a reset signal input pad. When RES# is set to “L”, the settings are initialized. The reset operation is performed by the RES# signal level.
17 A0 This is the Data/Command control pad that determines whether the data bits are data or a command.
A0 ="H": the inputs at D0 to D7 are treated as display data.
A0 ="L": the inputs at D0 to D7 are transferred to the command registers.
In I2C interface, this pad serves as SA0 to distinguish the different address of OLED driver.
18 WR#
(R/W#)		 This is a MPU interface input pad.
When connected to an 8080 MPU, this is active LOW. This pad connects to the 8080 MPU WR# signal. The signals on the data bus are latched at the rising edge of the WR# signal.
When connected to a 6800 Series MPU: This is the read/write control signal input terminal.
When R/W#="H": Read.
When R/W#="L": Write.
19 E/RD# This is a MPU interface input pad.
When connected to an 8080 series MPU, it is active LOW. This pad is connected to the RD# signal of the 8080 series MPU, and the data bus is in an output status when this signal is "L".
When connected to a 6800 series MPU, this is active HIGH. This is used as an enable clock input of the 6800 series MPU.
When RD# ="H": Enable.
When RD# ="L": Disable.
20~27 D0~D7 This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus.
When the serial interface is selected, then D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SI). At this time, D2 to D7 are set to high impedance.
When the I2C interface is selected, then D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SDAI). At this time, D2 to D7 are set to high impedance.
28 IREF This is a segment current reference pad. A resistor should be connected between this pad and VSS. Set the current at 18.75uA.
29 VCOMH This is a pad for the voltage output high level for common signals.
A capacitor should be connected between this pad and VSS.
30 VPP OLED panel power supply. It could be supplied externally.
A capacitor should be connected between this pad and VSS.
31 ESD_GND ESD Ground pin

2,42-Zoll 128x64 COG Grafik-OLED-Displaymodul (SH1106 IC) - REX012864ALL Zeichnung

Parameter Symbol Mindestwert Maximalwert Einheit
Tensión de Alimentación para Lógica VDD -0.3 3.6 V
Versorgungsspannung für Display VCC -0.3 14.5 V
Température de fonctionnement TOP -40 +80 °C
Température de rangement TSTG -40 +85 °C

DC Electrical Characteristics

Artikel Symbol Condition Mindestwert typischer Wert Maximalwert Einheit
Tensión de Alimentación para Lógica VDD1 － 1.65 3.0 3.3 V
Versorgungsspannung für Display VPP － 6.4 13.0 13.5 V
Hochpegeleingang VIH － 0.8×VDD1 － VDD1 V
Niedrigpegeleingang VIL － VSS － 0.2×VDD1 V
Hochpegelausgang VOH － 0.8×VDD1 － VDD1 V
Niedrigpegelausgang VOL － VSS － 0.2×VDD1 V
Display 50% Pixel on IPP VPP =13V － 22 33 mA

Related Products

Top