OLED Textdisplay COG 2 Zeilen × 16 Zeichen - REX001602H
OLED Textdisplay COG 2 Zeilen × 16 Zeichen - REX001602H
OLED Textdisplay COG 2 Zeilen × 16 Zeichen - REX001602H

OLED 16x2 Character Display

Model No. REX001602H

Das REX001602H ist ein 16 Zeichen x 2 Zeilen COG-Zeichen-OLED-Displaymodul. Die Größe des Bildschirms beträgt 1,23" diagonal, bei einer Moduldimension von 39,1x7,94 mm. Dieses OLED-Modul hat einen eingebauten IC RS0012 und bietet ein hohes Kontrastverhältnis von 10.000 : 1. Das OLED-Modul unterstützt viele Schnittstellen, darunter 8-Bit/4-Bit 6800, 8-Bit/4-Bit 8080, SPI und I2C-Schnittstellen. Die verfügbaren Emissionsfarben sind Weiß und Gelb. Zögern Sie nicht, uns eine Anfrage zu senden, wenn Sie weitere Informationen wünschen.

Das REX001602H OLED-Displaymodul arbeitet in einem weiten Temperaturbereich von -40 bis +80℃, die Lagertemperatur reicht von -40 bis +85℃.

Data source ref: REX001602HWPP3N00000

Zu Anfrage hinzufügen/Demo Code PDF-Download zurück Zurück
  • Allgemeine Spezifikationen
  • Schnittstelle Pin-Funktion
  • Zeichnung
  • Absolute Grenzwerte
  • Elektrische Eigenschaften
  • Video
Artikel Ausmaß Einheit
Bauweise COG
Größe (Diagonale) 1.23 Zoll
Zeichen × Linien 2 Zeilen × 16 Zeichen
Abmaße der modul 39.1 × 15.8 × 2.01 (MAX) mm
Anzeigebereich (VA) 32.69 × 7.94 mm
Aktiver Bereich (AA) 30.69 × 5.94 mm
Punktgröße 0.297 × 0.315 mm
Punktabstand 0.342 × 0.36 mm
Zeichengröße 1.66 × 2.835 mm
Zeichenabstand 1.935 × 3.105 mm
Emittierende Farbe OLED, Weiß / Gelb
IC RS0012
Schnittstelle 6800, 8080, SPI, I2C
Stromversorgung 3V
Duty 1/16 duty
Polarizer Type Polarizer optional
Typ OLED-Textdisplay

 

Pin No. Symbol Pin Type Beschreibung
1 GND P Ground Pin
2 V16 I This is the most positive voltage supply pin of the chip. It can be supplied externally or generated internally by using internal DC-DC voltage converter.
3 VCI P DCDC buffer Power Supply
4 GND P Ground Pin
5 VCC P Power Pin
6 BVR I Brightness control pin. It should be connected to VCC.
7 DVR I Pre charge time control. It should be connected to VCC.
8 VBREF O This pin is the internal voltage reference of DCDC1 circuit. A stabilization capacitor should be connected between this pin and GND
9 RESE I NMOS source input pin:
This pin connects to the source current pin of the external NMOS of the booster circuit.
10 GDR O Gate drive pulse output pin:
This output pin drives the gate of external NMOS of the booster circuit.
11 FB I Feedback voltage input pin:
This pin is the feedback resistor input of the booster circuit. It is used to adjust the booster output voltage level.
12 VDD P Power Pin (connect to stabilization capacitor)
13 IM1 I Interface selection
IM1 IM0 Interface
L L 6800-series
L H 8080-series
H L SPI
H H I2C
14 IM0 I
15 RESETB I Reset pin
16 RS I Register Select Input Pin
When this pin is set to "0", it is used as an Instruction Register.
When this pin is set to "1", it is used for as the Data Register.
17 CSB I Chip select input pins
Data / instruction I/O is enabled only when CSB is “L”.
18 RDB I Read / Write execution control pin
MPU Type RDB Description
6800-series E Read / Write control input pin
- RW = “H”: When E is “H”, DB0 to DB7 are in an output status.
- RW = “L”: The data on DB0 to DB7 are latched at the falling edge the E signal.
8080-series RDB Read enable clock input pin
When / RDB is “L”, DB0 to DB7 are in an output status.
19 WRB I Read / Write execution control pin
MPU Type WRB Description
6800-series RW Read / Write control input pin
- RW = “H” : read
- RW = “L” : write
8080-series WRB Write enable clock input pin.
The data on DB0 to DB7 are latched at the rising edge of the /WRB signal.
20 SDA I/O SDA is the serial data input for I2C.
21 SDC I/O SDC is the serial clock input/output for I2C.
22~25 DB7~DB4 I/O High Order Bidirectional Data I/O Pins
These pins are used for data transfer and reception between the MPU and WS0012.
When SPI is selected, DB5 will be the serial clock input: SCL
DB7 will be the serial data input: SDI.
DB6 will be the serial data output: SDO.
26~29 DB3~DB0 I/O Low Order Bidirectional Data I/O Pins
These pins are used for data transfer and reception between the MPU and WS0012.
These pins are not used during a 4-bit operation.
30 GND P Ground Pin

16x2 OLED Character Display Module - REX001602H

Artikel Symbol Mindestwert Maximalwert Einheit
Betriebstemperatur TOP -40 +80 °C
Lagertemperatur TST -40 +85 °C
Supply Voltage For Logic VCC -0.3 3.6 V
Supply Voltage For DCDC converter VCI -0.3 3.6 V
Supply Voltage for Display V16 -0.3 19.0 V

DC Elektrische Eigenschaften

Artikel Symbol Bedingung Mindestwert typischer Wert Maximalwert Einheit
Supply Voltage For Logic VCC － 2.6 3.3 3.5 V
Supply Voltage For DCDC converter VCI － 2.6 3.3 3.5 V
Supply Voltage for Display V16 － － 12.5 13.0 V
Input High Volt. VIH － 0.9xVCC － VCC V
Input Low Volt. VIL － GND － 0.1xVCC V
Output High Volt. VOH IOH=-0.5mA 0.8xVCC － VCC V
Output Low Volt. VOL IOL=0.5mA GND － 0.2xVCC V
50% Checkerboard
Operating Current		 I16 V16=12.5V － 2 4 mA

OLED Textdisplay COG 2 Zeilen × 16 Zeichen

Related Products

Top