- 仕様
- ピン配置
- 外形図
- 絶対最大定格
- 電気特性
| 項目 | 仕様 | 単位 |
|---|---|---|
| TFT シリーズ | 高輝度TFT,LVDS液晶ディスプレイ | |
| サイズ(対角線) | 7 | インチ |
| ドットマトリックス / 解像度 | 1024 × RGB × 600 (TFT) | ドット |
| モジュール寸法 | 169.9 (W) × 103.4 (H) × 5.6 (D) | mm |
| 外形寸法 | 169.9 × 103.4 | mm |
| アクティブエリア(AA) | 154.2114 × 85.92 | mm |
| ドットピッチ | 0.1506 × 0.1432 | mm |
| LCD タイプ | TFT, 白色, 透過型 | |
| 視野角 | 12時方向 | |
| グレースケール反転角度 | 6時方向 | |
| アスペクト率 | 16:9 | |
| バックライトタイプ | LED, 白色 | |
| コントロールボード | オプション | |
| 電源ボード | オプション | |
| IC | EK79001HE+EK73215BCGA | |
| インターフェス | LVDS | |
| タッチパネル | タッチパネルなし | |
| 表面 | アンチグレ(Anti-glare) | |
| 輝度 | 1100 | cd/㎡ |
| O-Film | なし | |
| 操作温度 | -20~+70 | °C |
| 保存温度 | -30~+80 | °C |
LCM Pinの定義
FPC Connector is used for the module electronics interface. The recommended model is FH12A-40S-0.5SH manufactured by Hirose.
| Pin No. | 記号 | I/O | ご説明 |
|---|---|---|---|
| 1 | VCOM | P | Common Voltage |
| 2 | VDD | P | Digital circuit |
| 3 | VDD | P | Digital circuit |
| 4 | NC | - | No connection |
| 5 | Reset | I | Global reset pin |
| 6 | STBYB | I | Standby mode, Normally pulled high STBYB = “1”, normal operation STBYB = “0”, timing controller, source driver will turn off, all output are High-Z |
| 7 | GND | P | Ground |
| 8 | RXIN0- | I | Negative LVDS differential data input |
| 9 | RXIN0+ | I | Positive LVDS differential data input |
| 10 | GND | P | Ground |
| 11 | RXIN1- | I | Negative LVDS differential data input |
| 12 | RXIN1+ | I | Positive LVDS differential data input |
| 13 | GND | P | Ground |
| 14 | RXIN2- | I | Negative LVDS differential data input |
| 15 | RXIN2+ | I | Positive LVDS differential data input |
| 16 | GND | P | Ground |
| 17 | RXCLKIN- | I | Negative LVDS differential clock input |
| 18 | RXCLKIN+ | I | Positive LVDS differential clock input |
| 19 | GND | P | Ground |
| 20 | RXIN3- | I | Negative LVDS differential data input |
| 21 | RXIN3+ | I | Positive LVDS differential data input |
| 22 | GND | P | Ground |
| 23 | NC | - | No connection |
| 24 | NC | - | No connection |
| 25 | GND | P | Ground |
| 26 | NC | - | No connection |
| 27 | DIMO | O | Backlight CABC controller signal output |
| 28 | SELB | I | 6bit/8bit mode select H:6bit / L:8bit |
| 29 | AVDD | P | Power for Analog Circuit |
| 30 | GND | P | Ground |
| 31 | NC | - | No connection |
| 32 | NC | - | No connection |
| 33 | L/R | I | Horizontal inversion |
| 34 | U/D | I | Vertical inversion |
| 35 | VGL | P | Negative power for TFT |
| 36 | GND | P | Ground |
| 37 | GND | P | Ground |
| 38 | VGH | P | Positive power for TFT |
| 39 | NC | - | No connection |
| 40 | NC | - | No connection |
I:input, O:output, P:power

| 項目 | 記号 | 最小値 | 典型値 | 最大値 | 単位 |
|---|---|---|---|---|---|
| 操作温度 | TOP | -20 | - | +70 | ℃ |
| 保存温度 | TST | -30 | - | +80 | ℃ |
典型動作条件
| 項目 | 記号 | 標準値 | 単位 | ||
|---|---|---|---|---|---|
| 最小値 | 典型値 | 最大値 | |||
| 電源電圧 | DVDD | 3.0 | 3.3 | 3.6 | V |
| AVDD | 9.4 | 9.6 | 9.8 | V | |
| VGH | 17 | 18 | 19 | V | |
| VGL | -6.6 | -6.0 | -5.4 | V | |
| 入力信号電圧 | VCOM | 3.1 | 3.3 | 3.6 | V |
| ロジック高レベル入力電圧 | VIH | 0.7 DVDD | - | DVDD | V |
| ロジック低レベル入力電圧 | VIL | 0 | - | 0.3 DVDD | V |
消費電流
| 項目 | 記号 | 標準値 | 単位 | ||
|---|---|---|---|---|---|
| 最小値 | 典型値 | 最大値 | |||
| 駆動電流 | IGH | - | 0.2 | 1.0 | mA |
| IGL | - | 0.2 | 1.0 | mA | |
| IDVDD | - | 4.0 | 10 | mA | |
| IAVDD | - | 20 | 50 | mA | |
バックライト駆動条件
| 項目 | 記号 | 標準値 | 単位 | ||
|---|---|---|---|---|---|
| 最小値 | 典型値 | 最大値 | |||
| LEDバックライト電圧 | VL | 16.8 | 19.2 | 21.0 | V |
| LEDバックライト電流 | IL | - | 320 | - | mA |
| LEDの寿命 | - | - | 50,000 | - | Hr |









