- Especificación
- Función Interfaz Pin
- Dibujo Contorno
- Valores Nominales Máximos Absolutos
- Características Electrónicas
| Elemento | Dimensión | Unidad |
|---|---|---|
| Serie TFT | Pantalla IPS TFT LCD,Alta Luminosidad TFT,Amplio Vista TFT | |
| Tamaño (Diagonal) | 15.6 | pulgada |
| Matriz de puntos (Resolución) | 1920 × RGB × 1080 | dots |
| Dimensión del módulo | 393.8 × 245.9 × 12.2 | mm |
| zona activa(AA) | 344.16 × 193.59 | mm |
| Distancia entre puntos | 0.17925 × 0.17925 | mm |
| Tipo de LCD | TFT, Normalmente Negro, Transmisivo | |
| Ángulo de Visualización | 80/80/80/80 (IPS) | |
| Tipo de retroiluminación | LED, Normalmente Blanco | |
| Placa de control | Não | |
| Tarjeta de alimentación | Não | |
| Interfaz | TC2055G | |
| Versión de PCAP FW | eDP | |
| zona activa PCAP | x06.0x00.0x00.0x00.0xFF.0xFF.0xFF.0xFF | mm |
| PCAP IC | ILI2511 | |
| PCAP Interfaz | USB (I2C available) | |
| PCAP Resolución | 16384 * 16384 | |
| Puntos de Detección | 10 | Points |
| Pantalla táctil | Pantalla táctil capacitiva proyectada, PCAP | |
| Superficie | Resplandor (Glare) | |
| Brillo | 800 | cd/㎡ |
| O-Film | Não | |
| Temperatura de funcionamiento | -20~+70 | °C |
| Temperatura de almacenamiento | -30~+80 | °C |
Definición Pin LCM
| Pin No. | Símbolo | Función | Observación |
|---|---|---|---|
| 1 | NC | Not Connect | |
| 2 | H_GND | Ground | |
| 3 | Lane1_N | Complement Signal Link Lane 1 | |
| 4 | Lane1_P | True Signal Line 1 | |
| 5 | H_GND | Ground | |
| 6 | Lane0_N | Complement Signal Link Lane 0 | |
| 7 | Lane0_P | True Signal Line 0 | |
| 8 | H_GND | Ground | |
| 9 | AUX_CH_P | True Signal Auxiliary Ch. | |
| 10 | AUX_CH_N | Complement Signal Auxiliary Ch. | |
| 11 | H_GND | Ground | |
| 12-13 | LCD_VDD | LCD Logic and Driver Power | +3.3V |
| 14 | NC | Not Connect | |
| 15-16 | LCD_GND | Ground | |
| 17 | HPD | HPD Signal Pin | |
| 18-21 | LCD_GND | Ground | |
| 22-30 | NC | Not Connect |
Definición Pin Retroiluminado
| Pin No. | Símbolo | Función |
|---|---|---|
| 1 | VLED+ | Black, LED_ Anode |
| 2 | VLED- | White, LED_ Cathode |
Definición Pin PCAP
| Pin No. | Símbolo | Función |
|---|---|---|
| 1 | USB_VSS | System ground |
| 2 | USB_VDD 5V | Power supply |
| 3 | USB_D+ | Data + |
| 4 | USB_D- | Data - |
| 5 | VSS | System ground |
| 6 | SDA | I2C data input and output |
| 7 | SCL | I2C clock input |
| 8 | RST | External Reset, Low is active |
| 9 | INT | External interrupt to the host |
| 10 | VDDT 3.3 | Power supply |
| Artículo | Símbolo | Mínimo | Tipo | Máximo | Unidad |
|---|---|---|---|---|---|
| Temperatura Funcionamiento | TOP | -20 | － | +70 | ℃ |
| Temperatura Almacenamiento | TST | -30 | － | +80 | ℃ |
Módulo LCD TFT
| Parámetro | Símbolo | Mínimo | Tipo | Máximo | Unidad | Condición |
|---|---|---|---|---|---|---|
| Logic/LCD Drive Voltage | LCD_VDD | 3.0 | 3.3 | 3.6 | V | - |
| LCD_VDD Current | IDD | - | 200 | 300 | mA | - |
| LCD_VDD Current | IDDMAX | - | - | 400 | mA | - |
| LCD_VDD Power | PDD | - | 0.66 | 1.32 | W | - |
| Inrush Current | IRush | - | - | 2 | A | - |
| Allowable Logic/LCD Drive Ripple Voltage | LCD_VDDrp | - | - | 100 | mV | Vp-p |
| Voltaje de suministro para Touch Logic | USB_VDD 5V | 4.75 | 5.0 | 5.25 | V | USB type |
| IUSB_VDD 5V | - | 95 | 150 | mA | ||
| VDDT 3.3 | 3.15 | 3.3 | 3.45 | V | I2C type | |
| IVDDT3.3 | - | 90 | 150 | mA |
Características de la retroiluminación
| Parámetro | Símbolo | Mínimo | Tipo | Máximo | Unidad | Condición |
|---|---|---|---|---|---|---|
| Entrada de LED | VLED | 29.7 | 33 | 37.4 | V | Ta=25 ⁰C |
| Corriente directa del LED | ILED | - | 360 | - | mA | |
| Vida útil del LED | - | - | 30,000 | - | Hours | Ta=25 ⁰C |
