- Especificación
- Función Interfaz Pin
- Dibujo Contorno
- Valores Nominales Máximos Absolutos
- Características Electrónicas
| Elemento | Dimensión | Unidad |
|---|---|---|
| Serie TFT | Alta Luminosidad TFT | |
| Tamaño (Diagonal) | 7 | pulgada |
| Matriz de puntos (Resolución) | 800 × RGB × 480 (TFT) | dots |
| Dimensión del módulo | 165.0(W) × 104.6(H) × 10.2(Máximo)(D) | mm |
| zona activa(AA) | 152.4 × 91.44 | mm |
| Distancia entre puntos | 0.1905 × 0.1905 | mm |
| Tipo de LCD | TFT, Normalmente Blanco, Transmisivo | |
| Dirección de la vista | 12 horas | |
| Dirección de inversión de escala de grises | 6 horas | |
| Relación de aspecto | 16:9 | |
| Tipo de retroiluminación | LED, Normalmente Blanco | |
| Placa de control | Não | |
| IC del controlador TFT | EK9713B+EK73202A | |
| Interfaz | 18-bit RGB | |
| Versión de PCAP FW | 0x07.0x00.0x00.0x00.0x70.0x44.0x0A.0x02 | |
| PCAP IC | ILI2130 | |
| PCAP Interfaz | I2C | |
| PCAP Resolución | 16384 × 16384 | |
| Puntos de Detección | 5 | Points |
| Pantalla táctil | Pantalla Táctil Capacitiva Proyectada, PCAP | |
| Superficie | Resplandor | |
| Brillo | 800 | cd/㎡ |
| Marco de orificio pasante | Não | |
| Temperatura de funcionamiento | -20~+70 | °C |
| Temperatura de almacenamiento | -30~+80 | °C |
Definición PIN LCM
| Pin | Símbolo | Función |
|---|---|---|
| 1 | GND | Power Ground |
| 2 | GND | Power Ground |
| 3 | NC | Not Connect |
| 4 | Vcc | Power Supply for Digital Circuit |
| 5 | Vcc | Power Supply for Digital Circuit |
| 6 | Vcc | Power Supply for Digital Circuit |
| 7 | Vcc | Power Supply for Digital Circuit |
| 8 | NC | Not Connect |
| 9 | DE | Data Enable |
| 10 | GND | Power Ground |
| 11 | GND | Power Ground |
| 12 | GND | Power Ground |
| 13 | B5 | Blue Data 5 (MSB) |
| 14 | B4 | Blue Data 4 |
| 15 | B3 | Blue Data 3 |
| 16 | GND | Power Ground |
| 17 | B2 | Blue Data 2 |
| 18 | B1 | Blue Data 1 |
| 19 | B0 | Blue Data 0 (LSB) |
| 20 | GND | Power Ground |
| 21 | G5 | Green Data 5 (MSB) |
| 22 | G4 | Green Data 4 |
| 23 | G3 | Green Data 3 |
| 24 | GND | Power Ground |
| 25 | G2 | Green Data 2 |
| 26 | G1 | Green Data 1 |
| 27 | G0 | Green Data 0(LSB) |
| 28 | GND | Power Ground |
| 29 | R5 | Red Data 5 (MSB) |
| 30 | R4 | Red Data 4 |
| 31 | R3 | Red Data 3 |
| 32 | GND | Power Ground |
| 33 | R2 | Red Data 2 |
| 34 | R1 | Red Data 1 |
| 35 | R0 | Red Data 0(LSB) |
| 36 | GND | Power Ground |
| 37 | GND | Power Ground |
| 38 | DCLK | Clock Signals ; Latch Data at the Falling Edge (CLK) |
| 39 | GND | Power Ground |
| 40 | GND | Power Ground |
Parte del Controlador de Retroiluminación
| Pin | Símbolo | Descripción |
|---|---|---|
| 1 | VLED+ | Red, LED_ Anode |
| 2 | VLED- | White, LED_ Cathode |
Definición PIN PCAP
| Pin No. | Símbolo | Función |
|---|---|---|
| 1 | VSS | Ground for analog circuit |
| 2 | VDDT | Power Supply : +3.3V |
| 3 | SCL | I2C clock input |
| 4 | NC | No connect |
| 5 | SDA | I2C data input and output |
| 6 | NC | No connect |
| 7 | /RST | External Reset, Low is active |
| 8 | NC | No connect |
| 9 | /INT | External interrupt to the host |
| 10 | VSS | Ground for analog circuit |
| Artículo | Símbolo | Mínimo | Tipo | Máximo | Unidad |
|---|---|---|---|---|---|
| Temperatura Funcionamiento | TOP | -20 | － | +70 | ℃ |
| Temperatura Almacenamiento | TST | -30 | － | +80 | ℃ |
Condiciones Funcionamiento
| Artículo | Símbolo | Condición | Mínimo | Tipo | Máximo | Unidad |
|---|---|---|---|---|---|---|
| Voltaje de Alimentación de la Pantalla LCM | Vcc | - | 3.0 | 3.3 | 3.6 | V |
| Corriente de Alimentación para LCM | Icc | Black Pattern | － | 140 | 210 | mA |
| Suministro PCAP | VDDT | - | 3.0 | 3.3 | 3.6 | V |
| ICTP | - | － | 62 | 93 | mA |
Condiciones Administración LED
| Parámetro | Símbolo | Mínimo | Tipo | Máximo | Unidad |
|---|---|---|---|---|---|
| Corriente LED | - | - | 200 | 250 | mA |
| Consumo de energía | VBL+=9.8V | - | 1960 | - | mW |
| Voltaje LED | VBL+ | 8.0 | 9.8 | 11.0 | V |
| Vida útil del LED | - | - | 50,000 | - | Hr |
