- Spécification
- Fonction des broches d’interfacePin Function
- Dessin de contour
- Paramètres électriques
- Video
| Article | Dimensions | Unité |
|---|---|---|
| Structure | COF | |
| Taille (diagonale) | 5.5 | pouces |
| Résolution matricielle | 256 × 64 | points |
| Dimensions du module | 146.0 × 45.0 × 2.05 | mm |
| Surface de visée (VA) | 137.65 × 35.89 | mm |
| Aire active (AA) | 135.65 × 33.89 | mm |
| Taille de point et de pixel | 0.5 × 0.5 | mm |
| Espacement de point et de pixel | 0.53 × 0.53 | mm |
| Couleur émise | OLED, Jaune / Vert / Blanc | |
| Prise en charge de la gamme de gris | Yes | |
| Mode d’affichage | Matrice passive | |
| IC | SSD1322 | |
| Interface | 8080, 6800, SPI | |
| Tension d’alimentation | 3V | |
| Duty | 1/64 cycle de service | |
| Température de fonctionnement | -40~+80 | °C |
| Température de rangement | -40~+80 | °C |
| Type de polariseur | Polariseur optionnel | |
| Type | Affichage OLED graphiques |
| Pin No. | Symbole | Description |
|---|---|---|
| 1 | NC | No Connection |
| 2 | VSS | Ground Pin |
| 3 | VCC | Panel driving voltage |
| 4 | VCOMH | COM deselected level |
| 5 | VLSS | Analog system ground pin |
| 6~13 | D7~D0 | Data Bus |
| 14 | E/RD# | Chip Enable Signal |
| 15 | R/W# | Read/Write Control |
| 16 | BS0 | Interface selection |
| 17 | BS1 | Interface selection |
| 18 | D/C# | Data/Command Control Pin |
| 19 | CS# | Chip Select Pin |
| 20 | RES# | Reset Signal Pin |
| 21 | FR | Not Connected |
| 22 | IREF | SEG output current refer pin |
| 23 | NC | No Connection |
| 24 | VDDIO | Voltage for interface logic |
| 25 | VDD | Voltage for logic |
| 26 | VCI | Low voltage power supply |
| 27 | VSL | SEG voltage refer Pin |
| 28 | VLSS | Analog system ground pin |
| 29 | VCC | Panel driving voltage |
| 30 | NC | No Connection |
| Élément | Symbole | Condition | Standard Value | Unité | ||
|---|---|---|---|---|---|---|
| min. | typ. | max. | ||||
| Input Voltage | VCI | --- | 2.8 | 3.0 | 3.3 | V |
