- General Specs
- Interface Pin Function
- Contour Drawing
- Absolute Maximum Ratings
- Electrical Characteristics
- Video
| Elemento | Dimensión | Unidad |
|---|---|---|
| Estructura | COG + PCB | |
| Tamaño (Diagonal) | 1.92 | pulgada |
| Matriz de puntos (Resolución) | 160 × 128 | dots |
| Dimensión del módulo | 34.90 × 57.80 × 5.36 | mm |
| Área de visión | 30.91 × 41.34 | mm |
| zona activa(AA) | 28.908 × 39.34 | mm |
| Tamaño del punto | 0.206 × 0.226 | mm |
| Distancia entre puntos | 0.226 × 0.246 | mm |
| Color de Emisión | OLED, White / Yellow | |
| Admite Escala de Grises | No | |
| Modo de visualización | Passive Matrix | |
| IC | SH1108 | |
| Interfaz | 4-line SPI | |
| Fuente de alimentación | 3V | |
| Deber | 1/128 duty | |
| Temperatura de funcionamiento | -40~+80 | °C |
| Temperatura de almacenamiento | -40~+85 | °C |
| Tipo de polarizador | Polarizer optional | |
| Tipo | OLED Graphic Display |
| No. | Symbol | Function |
|---|---|---|
| 1 | GND | Ground. |
| 2 | VCC | Power supply pin for logic. |
| 3 | D0 | When the serial interface is selected, then D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SI). |
| 4 | D1 | |
| 5 | RES# | This is a reset signal input pad. When RES is set to “L”, the settings are initialized. The reset operation is performed by the RES signal level. |
| 6 | D/C# | This is the Data/Command control pad that determines whether the data bits are data or a command. D/C = “H”: the inputs at D0 and D1 are treated as display data. D/C = “L”: the inputs at D0 and D1 are transferred to the command registers. |
| 7 | CS# | This pad is the chip select input. When CS = “L”, then the chip select becomes active, and data command I/O is enabled. |
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Supply Voltage for Logic | VCC | -0.3 | 3.6 | V |
| Operating Temperature | TOP | -40 | +80 | °C |
| Storage Temperature | TSTG | -40 | +85 | °C |
DC Electrical Characteristics
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage for Logic | VCC | － | 1.65 | 3.0 | 3.3 | V |
| High Level Input | VIH | － | 0.8×VCC | － | VCC | V |
| Low Level Input | VIL | － | GND | － | 0.2×VCC | V |
| High Level Output | VOH | － | 0.8×VCC | － | VCC | V |
| Low Level Output | VOL | － | GND | － | 0.2×VCC | V |
| 50% Check Board operating Current | ICC | VCC =3V | － | 100 | 200 | mA |
