REX009632C - 曜凌光電股份有限公司

0.68吋 96x32 繪圖型 OLED 顯示器模組

Model No. REX009632C

REX009632C 是一款 0.68 吋、96x32 解析度的繪圖型 OLED 模組，內建 SSD1315 驅動 IC。此模組專為小型化與低功耗應用設計，具備卓越的對比度、清晰度與靈活的顯示控制，非常適合穿戴式設備、工業儀器與智慧家庭應用。

該模組的尺寸為 19.8 x 12.32 mm，擁有 10,000:1 的高對比度，並支援多種介面選項，包括 8 位元 6800/8080 並列介面、4 線 SPI 以及 I2C 串列介面。邏輯供應電壓範圍為 2.8V 至 3.3V，標準值為 3V。

★ 另有其他 FPC 選項可供選擇

若您對 REX009632C 有任何疑問，歡迎聯繫我們的銷售團隊！

參考資料來源（ZIF）：REX009632CYAP3N00000
參考資料來源（Hotbar）：REX009632CWPP3N00H00

產品詢問

規格書下載

回上頁

項目	規格內容	單位
結構	COG
對角線尺寸	0.68	吋
點陣/解析度	96 × 32	dots
模組尺寸	19.80 × 12.32 × 1.21	mm
可視區域(VA)	17.298 × 6.418	mm
有效區域(AA)	16.298 × 5.418	mm
點(像素)大小	0.148 × 0.148	mm
點(像素)間距	0.17 × 0.17	mm
發光色	OLED, 白色 / 黃色
顯示模式	被動矩陣 (Passive Matrix)
IC	SSD1315
介面	8-bits 6800, 8-bits 8080, 4-line SPI, I2C
電源電壓	3V
驅動方式(Duty)	1/32 Duty
工作溫度	-40~+80	°C
儲存溫度	-40~+85	°C
可選FPC	是
類型	繪圖型OLED顯示器

Pin No.

符號

功能說明

VSS

Ground pin. It must be connected to external ground.

No connection

VDD

Power supply pin for core logic operation.

4~8

No connection

VDD

Power supply pin for core logic operation.

BS1

MCU bus interface selection pins. Select appropriate logic setting as described in the following table. BS2, BS1 are pin select

BS[2:1]	Interface
00	4 line SPI
01	I2C
11	8-bit 8080 parallel
10	8-bit 6800 parallel

Note
(1) 0 is connected to VSS
(2) 1 is connected to VDD

BS2

No connection

CS#

This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).

RES#

This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation.

D/C#

This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
In I2C mode, this pin acts as SA0 for slave address selection.

W/R#

This is read / write control input pin connecting to the MCU interface.
When interfacing to a 6800-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH (i.e. connect to VDD) and write mode when LOW.
When 8080 interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled LOW and the chip is selected.
When serial or I2C interface is selected, this pin must be connected to VSS.

E/RD#

This pin is MCU interface input.
When 6800 interface mode is selected, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled HIGH and the chip is selected.
When 8080 interface mode is selected, this pin receives the Read (RD#) signal. Read operation is initiated when this pin is pulled LOW and the chip is selected.
When serial or I2C interface is selected, this pin must be connected to VSS.

REX009632C (ZIF FPC)

0.68吋 OLED, 96x32 OLED 顯示器模組 ZIF FPC - REX009632C 規格圖

REX009632C (Hotbar FPC)

0.68吋 OLED, 96x32 OLED 顯示器模組 HOTBAR FPC - REX009632C 規格圖

參數	符號	最小值	最大值	單位
邏輯電源電壓	VDD	-0.3	-	4	V
顯示電源電壓	VCC	0	-	18	V
操作溫度	TOP	-40	-	+80	°C
儲存溫度	TSTG	-40	-	+85	°C

DC 特性

項目	符號	條件	最小值	典型值	最大值	單位
邏輯電源電壓	VDD	－	1.65	3.0	3.3	V
顯示電源電壓	VCC	－	7.5	12.0	12.5	V
輸入高準位	VIH	－	0.8×VDD	－	VDD	V
輸入低準位	VIL	－	0	－	0.2×VDD	V
輸出高準位	VOH	Iout = 100uA	0.9×VDD	－	VDD	V
輸出低準位	VOL	Iout = 100uA	0	－	0.1×VDD	V
顯示 50% 像素	ICC	VCC=12V	－	5.0	7.5	mA