OLED 2.42 I2C, 2.42 OLED I2C, OLED Display I2C 128x64 - REX012864J

Graphic OLED I2C 2.42 128x64, OLED Display I2C 128x64 with SSD1309

Model No. REX012864J

This OLED 2.42 I2C display supporting 6800, 8080, SPI and I2C interface. REX012864J is a dot matrix OLED display I2C 128x64 module. The size of the active area is 2.42 inch diagonal with module dimension 75.0x52.7 mm, and biasts high contrast ratio 10,000 : 1.

The 2.42 OLED I2C module has a built-in IC SSD1309. Logic supply voltage ranges from 2.8V-3.3V, the typical value is 3V. Operating temperature of the module ranges from -20°C to +70°C; storage temperature covers from -30°C to +80℃. The REX012864J OLED I2C 2.42 inch 128x64 module available emitting colors are white, yellow, green and sky blue.

Data source ref: REX012864JWPP3N00000

Inquiry or Demo Code Datasheet Back Previous Next

General Specs
Interface Pin Function
Contour Drawing
Electrical Characteristics

Item	Dimension	Unit
Structure	COG+PCB
Size (Diagonal)	2.42	inch
Dot Matrix / Resolution	128 × 64	dots
Module Dimension	75.0 × 52.7 × 8.5	mm
Viewing Area	57.01 × 29.49	mm
Active Area	55.01 × 27.49	mm
Dot / Pixel Size	0.40 × 0.40	mm
Dot / Pixel Pitch	0.43 × 0.43	mm
Emitting Color	OLED, White / Yellow / Green / Sky Blue
Display Mode	Passive Matrix
IC	SSD1309
Interface	8080 option 6800, SPI, I2C
Power Supply	3V
Duty	1/64 duty
Operating Temperature	-40~+80	°C
Storage Temperature	-40~+85	°C
Polarizer Type	Polarizer optional
Type	OLED Graphic Display

Pin No.	Symbol	Description
1	VDD	Voltage for logic
2	VSS	Ground Pin
3	NC	No Connection
4~11	D0~D7	Data Bus
12	CS#	Chip Select Pin
13	NC	No Connection
14	RES#	Reset Signal Pin
15	R/W#	Read/Write Control
16	D/C#	Data/Command Control Pin
17	E	Chip Enable Signal
18	NC	No Connection
19	DISP	Display off
20	NC	No Connection