2.8 inch TFT LCD Module with RTP - 2.8 TFT - RFJ280E-ALW-DNS - Raystar
2.8 inch TFT LCD Module with RTP - 2.8 TFT - RFJ280E-ALW-DNS - Raystar

2.8-inch TFT LCD Module 240x320 with MCU Interface (ILI9341 IC)

Model No. RFJ280E-ALW-DNS

RFJ280E-ALW-DNS is a 2.8 TFT module featuring a 2.8-inch transmissive TFT LCD with a resolution of 240×320 pixels. This 2.8 TFT LCD module integrates a resistive touch panel and a built-in ILI9341 IC supporting an MCU interface. The module provides a brightness of 350 cd/m² with a contrast ratio of 500:1.

This 2.8 TFT LCD module operates within a temperature range of -20 °C to +70 °C and supports storage temperatures from -30 °C to +80 °C. The 2.8 TFT design is suitable for industrial applications, testing equipment, medical devices, and home appliances.

If you have any questions regarding 2.8 TFT or 2.8 TFT LCD module solutions, please feel free to contact our sales team for further technical information.

Inquiry or Demo Code Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
TFT Series Standard TFT
Size (Diagonal) 2.8 inch
Dot Matrix / Resolution 240 × RGB × 320 (TFT) dots
Module Dimension 50.0 (W) × 69.2 (H) × 3.6 (D) mm
Active Area 43.2 × 57.6 mm
Dot / Pixel Pitch 0.06 × 0.18 mm
LCD Type TFT, Normally White, Transmissive
View Direction 6 o’clock
Gray Scale Inversion Direction 12 o’clock
Aspect Ratio Portrait
Backlight Type LED, Normally White
Control Board No
Power Board No
Built-in Controller ILI9341
Interface MCU
Touch Panel Resistive Touch Screen (RTP)
Surface Glare
Brightness 350 cd/㎡
O-Film No
Operating Temperature -20~+70 °C
Storage Temperature -30~+80 °C

MCU Interface Pin Definition for 2.8 TFT

Pin No. Symbol Function I/O
1~4 DB8~DB11 Data bus I/O
5 GND Ground P
6 IOVCC power supply P
7 /CS Chip select signal. I
8 RS register select I
9 /WR Write data when WRX is Low. I
10 /RD Read strobe signal. Read out data when RDX is Low. I
11 GND Ground P
12 NC No connection -
13 NC No connection -
14 NC No connection -
15 NC No connection -
16 LEDA Anode of LED backlight. P
17~20 LEDK1~4 Cathode of LED backlight. P
21 IM0 IM0=1 8Bit DB8-15; IM0=0 16Bit DB0-DB15; P
22 DB12 Data bus I/O
23~30 DB0~DB7 Data bus I/O
31 /RESET System reset pin. I
32~33 VCI power supply P
34 GND Ground P
35~37 DB13~DB15 Data bus I/O

Mechanical Dimensions of 2.8 TFT LCD Module

2.8 inch TFT LCD Module with RTP - 2.8 TFT - RFJ280E-ALW-DNS Contour Drawing - Raystar

Operating and Storage Limits of 2.8 TFT LCD Module

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 - +70 ℃
Storage Temperature TST -30 - +80 ℃

Operating Conditions

Item Symbol Condition Min Typ Max Unit
Supply Voltage For Analog VCI - 2.5 -  3.3 V
Supply Voltage For Logic IOVCC - 1.65 -  3.3 V
Supply Current For LCM ICC - - 5 7.5 mA

LED Driving Conditions

Parameter Symbol Min Typ Max Unit
LED Current - - 80 - mA
Power Consumption -  224 256 272  mW
LED Voltage VBL+  2.9 3.2 3.4 V
LED Life Time - - 30,000 - Hr
Top