RFH700A7-AIW-LNN - Raystar Optronics, Inc.

7-inch 1024x600 LVDS TFT LCD Display Panel

Model No. RFH700A7-AIW-LNN

RFH700A7-AIW-LNN is a 7-inch diagonal, 1024x600 pixels, 16:9 aspect ratio standard TFT LCD module. This TFT module has driver IC EK79001HE and EK73215BCGA. With the help of anti-glare display surface, the screen doesn’t reflect light and preserves better image quality.

This TFT display module supporting LVDS Interface. The transmission technology is mainly developed to reduce the shortcomings of high power consumption and large EMI electromagnetic interference when transmitting broadband at high bit rate, so that it can effectively achieve low noise and low power consumption.

RFH700A7-AIW-LNN TFT LCD module power supply voltage is 3V-3.6V (typical 3.3V). The brightness is 600 cd/m2 with contrast ratio 800:1. The module works within temperature from -20~70°C; storage temperature range is -30~+80°C.

Inquiry or Demo Code

Datasheet

Back

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
TFT Series	Standard TFT, LVDS TFT LCD Display
Size (Diagonal)	7	inch
Dot Matrix / Resolution	1024 × RGB × 600 (TFT) dots	dots
Module Dimension	164.8(W) × 99.8(H) × 5.65(D)	mm
Active Area	154.2144 × 85.92	mm
Dot / Pixel Pitch	0.1506 × 0.1432	mm
LCD Type	TFT, Normally White, Transmissive
View Direction	12 o’clock
Gray Scale Inversion Direction	6 o’clock
Aspect Ratio	16:9
Backlight Type	LED, Normally White
Control Board	No
TFT Driver IC	EK79001HE + EK73215BCGA
Interface	LVDS
Touch Panel	Without Touch Panel
Surface	Anti-Glare
Brightness	600	cd/㎡
Mounting Hole	No
Operating Temperature	-20~+70	°C
Storage Temperature	-30~+80	°C

LCM PIN Definition

FPC Connector is used for the module electronics interface. The recommended model is FH12A-40S-0.5SH manufactured by Hirose.

Pin No.	Symbol	I/O	Function
1	VCOM	P	Common Voltage
2	VDD	P	Digital circuit
3	VDD	P	Digital circuit
4	NC	---	No connection
5	Reset	I	Global reset pin
6	STBYB	I	Standby mode, Normally pulled high STBYB = “1”, normal operation STBYB = “0”, timing controller, source driver will turn off, all output are High-Z
7	GND	P	Ground
8	RXIN0-	I	Negative LVDS differential data input
9	RXIN0+	I	Positive LVDS differential data input
10	GND	P	Ground
11	RXIN1-	I	Negative LVDS differential data input
12	RXIN1+	I	Positive LVDS differential data input
13	GND	P	Ground
14	RXIN2-	I	Negative LVDS differential data input
15	RXIN2+	I	Positive LVDS differential data input
16	GND	P	Ground
17	RXCLKIN-	I	Negative LVDS differential clock input
18	RXCLKIN+	I	Positive LVDS differential clock input
19	GND	P	Ground
20	RXIN3-	I	Negative LVDS differential data input
21	RXIN3+	I	Positive LVDS differential data input
22	GND	P	Ground
23	NC	---	No connection
24	NC	---	No connection
25	GND	P	Ground
26	NC	---	No connection
27	DIMO	O	Backlight CABC controller signal output
28	SELB	I	6bit/8bit mode select H:6bit / L:8bit
29	AVDD	P	Power for Analog Circuit
30	GND	P	Ground
31	LED-	P	LED Cathode
32	LED-	P	LED Cathode
33	L/R	I	Horizontal inversion
34	U/D	I	Vertical inversion
35	VGL	P	Negative power for TFT
36	GND	P	Ground
37	GND	P	Ground
38	VGH	P	Positive power for TFT
39	LED+	P	LED Anode
40	LED+	P	LED Anode

I:input ,O:output,P:power

7-inch 1024x600 LVDS TFT LCD Display Panel - RFH700A7-AIW-LNN

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Typical Operation Conditions

Item	Symbol	Values			Unit
Item	Symbol	Min.	Typ.	Max.	Unit
Power voltage	DVDD	3.0	3.3	3.6	V
	AVDD	9.4	9.6	9.8	V
	VGH	17	18	19	V
	VGL	-6.6	-6.0	-5.4	V
Input signal voltage	VCOM	3.1	3.3	3.6	V
Input logic high voltage	VIH	0.7 DVDD	-	DVDD	V
Input logic low voltage	VIL	0	-	0.3 DVDD	V