- General Specs
- Interface Pin Function
- Contour Drawing
- Absolute Maximum Ratings
- Electrical Characteristics
| Item | Dimension | Unit |
|---|---|---|
| TFT Series | High Brightness TFT LCD,Capacitive Touch Screen Display | |
| Size (Diagonal) | 7 | inch |
| Dot Matrix / Resolution | 800 × RGB × 480 (TFT) | dots |
| Module Dimension | 165.0 × 100 × 7.45 | mm |
| Active Area | 154.08 × 85.92 | mm |
| Dot / Pixel Pitch | 0.1926 × 0.179 | mm |
| LCD Type | TFT, Normally White, Transmissive | |
| View Direction | 12 o’clock | |
| Gray Scale Inversion Direction | 6 o’clock | |
| Aspect Ratio | 16:9 | |
| Backlight Type | LED, Normally White | |
| Control Board | No | |
| Power Board | No | |
| TFT Driver IC | HX8264-E&HX8664-B | |
| Interface | 24-bit RGB | |
| PCAP FW Version | 0x07.0x00.0x00.0x00.0x65.0x90.0x00.0 x01 | |
| PCAP IC | ILI2130 | |
| PCAP Interface | I2C | |
| PCAP Resolution | 16384 × 16384 | |
| Detect Points | 5 | Points |
| Color arrangement | RGB-STRIPE | |
| Touch Panel | Projected Capacitive Touch Panel, PCAP | |
| Surface | Glare | |
| Brightness | 700 | cd/㎡ |
| O-Film | No | |
| Operating Temperature | -20~+70 | °C |
| Storage Temperature | -30~+80 | °C |
LCM Pin Definition for Capacitive Touch Screen TFT
| Pin No. | Symbol | Function |
|---|---|---|
| 1 | LED- | Backlight ground |
| 2 | LED+ | Power supply for backlight |
| 3 | GND | Power ground |
| 4 | VCC | Power for Digital Circuit |
| 5 | R0 | Red data(LSB) |
| 6 | R1 | Red data |
| 7 | R2 | Red data |
| 8 | R3 | Red data |
| 9 | R4 | Red data |
| 10 | R5 | Red data |
| 11 | R6 | Red data |
| 12 | R7 | Red data(MSB) |
| 13 | G0 | Green data(LSB) |
| 14 | G1 | Green data |
| 15 | G2 | Green data |
| 16 | G3 | Green data |
| 17 | G4 | Green data |
| 18 | G5 | Green data |
| 19 | G6 | Green data |
| 20 | G7 | Green data(MSB) |
| 21 | B0 | Blue data(LSB) |
| 22 | B1 | Blue data |
| 23 | B2 | Blue data |
| 24 | B3 | Blue data |
| 25 | B4 | Blue data |
| 26 | B5 | Blue data |
| 27 | B6 | Blue data |
| 28 | B7 | Blue data(MSB) |
| 29 | GND | Power Ground |
| 30 | CLK | Sample clock(DCLK) |
| 31 | R/L | Right / Left selection |
| 32 | Hsync | Horizontal Sync Input |
| 33 | Vsync | Vertical Sync Input |
| 34 | NC | No connection |
| 35 | U/D | Up/down selection |
| 36 | RESET | Global reset pin. |
| 37-40 | NC | No connection |
I: input, O: output, P: Power
PCAP Pin Definition
| Pin No. | Symbol | Function |
|---|---|---|
| 1 | VSS | Ground for analog circuit |
| 2 | VDDT | Power Supply : +3.3V |
| 3 | SCL | I2C clock input |
| 4 | NC | No connect |
| 5 | SDA | I2C data input and output |
| 6 | NC | No connect |
| 7 | RST | External Reset, Low is active |
| 8 | NC | No connect |
| 9 | INT | External interrupt to the host |
| 10 | VSS | Ground for analog circuit |
Mechanical Outline of 7-inch Capacitive Touch Screen Display Module
Operating Limits for 7-inch Capacitive Touch Screen Display Module
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | － | +70 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
Operating Conditions
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage For Logic | VCC | 3.0 | 3.3 | 3.6 | V |
| Power Supply For Current | VCC =3.3V | － | 76 | 114 | mA |
| Supply PCAP | VDDT | 3.0 | 3.3 | 3.6 | V |
| ICTP | － | 65 | 98 | mA |
LED Driving Conditions
| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| LED Current | - | - | 270 | - | mA |
| Power Consumption | - | 2,268 | 2,430 | 2,592 | mW |
| LED Voltage | A~K | 8.4 | 9.0 | 9.6 | V |
| LED Life Time | - | - | 50,000 | - | Hr |
