0.69 OLED Display Module 96×16 Resolution (SSD1306)

0.69-inch OLED Display Module COG 96×16 Resolution (SSD1306 IC)

Model No. REX009616B

The REX009616B is a 0.69-inch Passive Matrix OLED module with a 96×16 dot resolution, built using COG (Chip-on-Glass) structure and driven by the SSD1306 controller IC. This compact 0.69 OLED display features an I2C interface and operates at 1/16 duty.

With overall dimensions of 26.3 × 8.0 × 1.26 mm, the OLED 0.69 module is ideal for space-constrained embedded applications such as wearables, handheld devices, and compact control systems. Available emitting colors include white and yellow.

This 0.69 OLED module supports a logic voltage range of 1.65V to 3.3V and operates reliably in temperatures from -30°C to +70°C. Typical operating current is 5–10 mA.

Designed with low power consumption and a slim COG structure, the REX009616B delivers a reliable and efficient solution for projects requiring a small, clear, and energy-saving 0.69 OLED display.

If you need technical support or product quotes for the REX009616B or other 0.69 OLED display modules, please feel free to contact our sales team!

Data source ref: REX009616BWPP3N0Y000

Inquiry or Demo Code

Datasheet

Back

Item	Dimension	Unit
Structure	COG
Size (Diagonal)	0.69	inch
Dot Matrix / Resolution	96 × 16	dots
Module Dimension	26.3 × 8.0 × 1.26	mm
Viewing Area	19.26 × 5.18	mm
Active Area	17.26 × 3.18	mm
Dot / Pixel Size	0.16 × 0.18	mm
Dot / Pixel Pitch	0.18 × 0.20	mm
Emitting Color	OLED, Yellow / White
Display Mode	Passive Matrix
IC	SSD1306
Interface	I2C
Power Supply	3V
Duty	1/16 Duty
Operating Temperature	-30~+70	°C
Storage Temperature	-30~+70	°C
Polarizer Type	Polarizer optional
Type	OLED Graphic Display

Key Features of REX009616B 0.69 OLED Module

Pin No.	Symbol	Function
1	C2N	C1P/C1N – Pin for charge pump capacitor; Connect to each other with a capacitor. C2P/C2N – Pin for charge pump capacitor; Connect to each other with a capacitor.
2	C2P
3	C1P
4	C1N
5	VBAT	This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used.
6	NC	No connection
7	VSS	This is a ground pin.
8	VDD	Power supply pin for core logic operation.
9	RES#	This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation.
10	SCL	When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
11	SDA
12	IREF	This pin is segment current reference pin. A resistor should be connected between this pin and VSS. Set the current lower than 30uA. When internal IREF is used, this pin should be kept NC.
13	VCOMH	The pin for COM signal deselected voltage level. A capacitor should be connected between this pin and VSS.
14	VCC	This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used.

0.69-inch 96x16 COG Graphic OLED Display Module (SSD1306 IC) - REX009616B Contour Drawing

REX009616B 0.69 OLED Module - Operating Temperature & Low Power

Parameter	Symbol	Min	Max	Unit
Supply Voltage for Logic	VDD	0	4	V
Supply Voltage for Display	VCC	0	16	V
Charge Pump Regulator Supply Voltage	VBAT	0	5	V
Operating Temperature	TOP	-30	70	°C
Storage Temperature	TSTG	-30	70	°C

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage for Logic	VDD	－	1.65	3.0	3.3	V
Supply Voltage for Display (Supplied Externally)	VCC	－	6.0	7.5	8.0	V
Charge Pump Regulator Supply Voltage	VBAT	－	3.0	－	4.2	V
Charge Pump Output Voltage for Display (Generated by Internal DC/DC)	Charge Pump VCC	－	7.0	7.5	－	V
Input High Volt	VIH	－	0.8×VDD	－	VDD	V
Input Low Volt	VIL	－	0	－	0.2×VDD	V
Output High Volt	VOH	－	0.9×VDD	－	VDD	V
Output Low Volt	VOL	－	0	－	0.1×VDD	V
50% Check Board Operating Current (VCC Supplied Externally)	ICC	－	－	5	10	mA
50% Check Board Operating Current (VCC Generated by Internal DC/DC)	IBAT	－	－	5	10	mA