0.68 inch 96x32 SSD1305 OLED Module

0.68-inch 96x32 SSD1315 OLED Module with 6800/8080/SPI/I2C Interfaces

Model No. REX009632C

The REX009632C is a 0.68-inch 96x32 graphic OLED module featuring an integrated SSD1315 OLED driver IC. Designed for compact and power-efficient applications, this module delivers exceptional contrast, clarity, and flexible display control, making it an excellent choice for wearable devices, industrial equipment, and smart home applications.

With a 0.68-inch diagonal size, the SSD1315 OLED module has a compact dimension of 19.8 x 12.32 mm. It boasts a high contrast ratio of 10,000:1 and offers multiple interface options, including 8-bit 6800/8080 parallel interface, 4-line SPI, and I2C serial interface. The logic supply voltage ranges from 2.8V to 3.3V, with a typical value of 3V.

★ Other FPC options available

If you have more questions about REX009632C, please feel free to contact our sales team!

Data Source Ref (ZIF): REX009632CYAP3N00000
Data Source Ref (Hotbar): REX009632CWPP3N00H00

Inquiry or Demo Code

Datasheet

Back

Item	Dimension	Unit
Structure	COG
Size (Diagonal)	0.68	inch
Dot Matrix / Resolution	96 × 32	dots
Module Dimension	19.80 × 12.32 × 1.21	mm
Viewing Area	17.298 × 6.418	mm
Active Area	16.298 × 5.418	mm
Dot / Pixel Size	0.148 × 0.148	mm
Dot / Pixel Pitch	0.17 × 0.17	mm
Emitting Color	OLED, Yellow / White
Display Mode	Passive Matrix
IC	SSD1315
Interface	8-bits 6800, 8-bits 8080, 4-line SPI, I2C
Power Supply	3V
Duty	1/32 Duty
Operating Temperature	-40~+80	°C
Storage Temperature	-40~+85	°C
FPC Options	Yes
Type	OLED Graphic Display

REX009632C - 0.68-inch 96x32 SSD1315 OLED Module

Pin Function for 0.68-inch SSD1315 OLED Dispaly

Pin No.

Symbol

Function

VSS

Ground pin. It must be connected to external ground.

No connection

VDD

Power supply pin for core logic operation.

4~8

No connection

VDD

Power supply pin for core logic operation.

BS1

MCU bus interface selection pins. Select appropriate logic setting as described in the following table. BS2, BS1 are pin select

BS[2:1]	Interface
00	4 line SPI
01	I2C
11	8-bit 8080 parallel
10	8-bit 6800 parallel

Note
(1) 0 is connected to VSS
(2) 1 is connected to VDD

BS2

No connection

CS#

This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).

RES#

This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation.

D/C#

This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
In I2C mode, this pin acts as SA0 for slave address selection.

W/R#

This is read / write control input pin connecting to the MCU interface.
When interfacing to a 6800-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH (i.e. connect to VDD) and write mode when LOW.
When 8080 interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled LOW and the chip is selected.
When serial or I2C interface is selected, this pin must be connected to VSS.

E/RD#

This pin is MCU interface input.
When 6800 interface mode is selected, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled HIGH and the chip is selected.
When 8080 interface mode is selected, this pin receives the Read (RD#) signal. Read operation is initiated when this pin is pulled LOW and the chip is selected.
When serial or I2C interface is selected, this pin must be connected to VSS.

REX009632C with ZIF FPC

0.68-inch 96x32 SSD1305 OLED Module - REX009632B with ZIF FPC - Raystar

REX009632C with Hotbar FPC

0.68-inch 96x32 SSD1305 OLED Module with ZIF FPC - REX009632B with Hotbar FPC - Raystar

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage for Logic	VDD	-0.3	-	4	V
Supply Voltage for Display	VCC	0	-	18	V
Operating Temperature	TOP	-40	-	+80	°C
Storage Temperature	TSTG	-40	-	+85	°C

DC Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage for Logic	VDD	－	1.65	3.0	3.3	V
Supply Voltage for Display	VCC	－	7.5	12.0	12.5	V
High Level Input	VIH	－	0.8×VDD	－	VDD	V
Low Level Input	VIL	－	0	－	0.2×VDD	V
High Level Output	VOH	Iout = 100uA	0.9×VDD	－	VDD	V
Low Level Output	VOL	Iout = 100uA	0	－	0.1×VDD	V
Display 50% Pixel on	ICC	VCC=12V	－	5.0	7.5	mA