1.54 inch COG Graphic OLED Module 128x64 (SSD1309) with PCB - REA012864A

1.54" COG Graphic OLED Module 128x64 (SSD1309) with PCB

Model No. REA012864A

REA012864A is a graphic COG OLED display module with resolution 128x64 pixels. Module size is 42.4×38.0 mm; Active area size is 35.05×17.51 mm (1.54 inches diagonal). The additional PCB on this OLED display helps users save time developing their own. Also, the four screw holes of the PCB are designed for easy mounting. This OLED module has built-in IC SSD1309 supporting 4-Wire SPI interface and I2C options.

Our OLED boasts high contrast ratio 10,000:1 making the visual performance stand out from traditional displays. Logic supply voltage ranges from 2.8V-5.5V, the typical value is 3.3V. The module works within temperature from -40℃ to +80℃; Storage temperature range is -40℃ to +85℃.Raystar provides four OLED emitting colors for you to choose from: white, yellow and green. REA012864A is a good fit for applications such as smart home appliances, medical equipment, dashboards, etc.

Data source ref:REA012864AWAP3N00000

Inquiry or Demo Code Datasheet Back Previous Next

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
Structure	COG + PCB
Size (Diagonal)	1.54	inch
Dot Matrix / Resolution	128 × 64	dots
Module Dimension	42.4 × 38.0 × 1.45	mm
Viewing Area	37.05 × 19.52	mm
Active Area	35.05 × 17.51	mm
Dot / Pixel Size	0.249 × 0.249	mm
Dot / Pixel Pitch	0.274 × 0.274	mm
Emitting Color	OLED, White / Yellow / Green
Display Mode	Passive Matrix
IC	SSD1309
Interface	4-Wire SPI, I2C Option
Power Supply	3V
Duty	1/64 duty
Operating Temperature	-40~+80	°C
Storage Temperature	-40~+85	°C
Polarizer Type	Polarizer optional
Type	OLED Graphic Display

No.	Symbol	Function
1	GND	Ground pin.
2	VCC	Power supply pin for core logic operation.
3	D0	The serial clock input
4	D1	The serial data input
5	RES#	This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin pull HIGH during normal operation.
6	D/C#	This pin is Data/Command control pin connecting to the MCU. When the pin is pulled HIGH, the data at D1 will be interpreted as data. When the pin is pulled LOW, the data at D1 will be transferred to a command register.
7	CS#	This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).

1.54 inch COG Graphic OLED Module 128x64 (SSD1309) with PCB - REA012864A

Parameter	Symbol	Min	Max	Unit
Supply Voltage for Display	VCC	2	6	V
Operating Temperature	TOP	-40	+80	°C
Storage Temperature	TSTG	-40	+85	°C

DC Electrical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage for Logic	VCC	－	2.8	3.3	5.5	V
High Level Input	VIH	－	0.8×VCC	－	－	V
Low Level Input	VIL	－	－	－	0.2×VCC	V
High Level Output	VOH	－	0.9×VCC	－	－	V
Low Level Output	VOL	－	－	－	0.1×VCC	V
50% Check Board operating Current	ICC	VCC =3.3V	－	80	160	mA