1.54-inch COG Graphic OLED Module 128x64 (SSD1327) with PCB - REA012864AA

1.54" COG Graphic OLED Module 128x64 (SSD1327) with PCB

Model No. REA012864AA

REA012864AA is a graphic COG OLED display module with resolution 128x64 pixels. Module size is 42.4×38.0 mm; Active area size is 35.05×17.51 mm (1.54 inches diagonal). The additional PCB on this OLED display helps users save time developing their own. Also, the four screw holes of the PCB are designed for easy mounting. This OLED module has built-in IC SSD1327 supporting 4-wire SPI interface.

Our OLED boasts high contrast ratio 10,000:1 making the visual performance stand out from traditional displays. Logic supply voltage ranges from 2.8V-5.2V, the typical value is 3.3V. The module works within temperature from -40℃ to +80℃; Storage temperature range is -40℃ to +85℃.Raystar provides four OLED emitting colors for you to choose from: white and yellow. REA012864AA is a good fit for applications such as smart home appliances, medical equipment, dashboards, etc.

Data source ref:REA012864AAWAP3N00000

Inquiry or Demo Code Datasheet Back Previous Next

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
Structure	COG + PCB
Size (Diagonal)	1.54	inch
Dot Matrix / Resolution	128 × 64	dots
Module Dimension	42.4 × 38.0 × 5.96(MAX)	mm
Viewing Area	37.05 × 19.51	mm
Active Area	35.05 × 17.51	mm
Dot / Pixel Size	0.249 × 0.249	mm
Dot / Pixel Pitch	0.274 × 0.274	mm
Emitting Color	OLED, White / Yellow
Display Mode	Passive Matrix
IC	SSD1327
Interface	4-wire SPI
Power Supply	3V
Duty	1/64 duty
Operating Temperature	-40~+80	°C
Storage Temperature	-40~+85	°C
Polarizer Type	Polarizer optional
Type	OLED Graphic Display

No.	Symbol	Function
1	GND	This is a ground pin.
2	VCC	Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source.
3	D0	These pins are bi-directional data bus connecting to the MCU data bus. Unused pins are recommended to tie LOW. When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC.
4	D1
5	RES#	This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin pull HIGH during normal operation.
6	D/C#	This pin is Data/Command control pin connecting to the MCU. When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data. When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
7	CS#	This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).

1.54-inch COG Graphic OLED Module 128x64 (SSD1327) with PCB - REA012864AA

Parameter	Symbol	Min	Max	Unit
Supply Voltage for Logic	VCC	2.0	5.5	V
Operating Temperature	TOP	-40	+80	°C
Storage Temperature	TSTG	-40	+85	°C

DC Electrical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage for Logic(3V/5V)	VCC	－	2.8	3.3	5.2	V
Input High Volt.	VIH	－	0.8×VCC	－	VCC	V
Input Low Volt.	VIL	－	0	－	0.2×VCC	V
Output High Volt.	VOH	－	0.9×VCC	－	VCC	V
Output Low Volt.	VOL	－	0	－	0.1×VCC	V
Display 50% Pixel on	ICC	VCC=3.3V	－	60	120	mA