4.9 OLED, 200x16 OLED - REG020016A
4.9 OLED, 200x16 OLED - REG020016A
4.9 OLED, 200x16 OLED - REG020016A
4.9 OLED, 200x16 OLED - REG020016A
4.9 OLED, 200x16 OLED - REG020016A

4.9" 200x16 OLED Graphic Display Module

Model No. REG020016A

REG020016A is a dot matrix 200x16 COB graphic type OLED display module. The size of the active area is 4.9” diagonal with module dimension 182.0x38.5 mm. This 4.9 inches OLED display has built-in IC RS0010-TX, and boasts high contrast ratio 10,000 : 1. There are many interface options to choose from, including 6800, 8080 and SPI interface. Logic supply voltage ranges from 4.8V-5.3V, the typical value is 5V. The available emitting colors are white, yellow, sky blue and green.

Data source ref:REG020016AYPP5N00100

Inquiry or Demo Code Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Structure COB
Size (Diagonal) 4.9 inch
Dot Matrix / Resolution 200 × 16 dots
Module Dimension 182.0 × 38.5 × 9.3 (MAX) mm
View Area 154.4 × 16.5 mm
Active Area 123.95 × 11.15 mm
Dot / Pixel Size 0.57 × 0.65 mm
Dot / Pixel Pitch 0.62 × 0.70 mm
Emitting Color OLED, Yellow / White / Sky Blue / Green
IC RS0010-TX
Interface 6800, option 8080, SPI
Power Supply 5V
Duty 1/16 duty cycle
Operating Temperature -40~+80 °C
Storage Temperature -40~+85 °C
Polarizer Type Polarizer optional
Type OLED Graphic Display
Pin No. Symbol Level Description
1 VSS 0V Ground
2 VDD 5.0V Supply Voltage for logic
3 NC  
4 RS H/L H: DATA, L: Instruction code
5 R/W H/L H: Read(Module→MPU) L: Write(MPU→Module)
6 E H,H→L Chip enable signal
7 DB0 H/L Data bit 0
8 DB1 H/L Data bit 1
9 DB2 H/L Data bit 2
10 DB3 H/L Data bit 3
11 DB4 H/L Data bit 4
12 DB5 H/L Data bit 5
13 DB6 H/L Data bit 6
14 DB7 H/L Data bit 7
15 CS1 Chip1 select input pin
16 CS2 Chip2 select input pin

4.9 OLED, 200x16 OLED - REG020016A

Item Symbol Min Max Unit
Operating Temperature TOP -40 +80 °C
Storage Temperature TST -40 +85 °C
Supply Voltage For Logic VDD-VSS -0.3 5.3 V
Item Symbol Condition Min Typ Max Unit
Supply Voltage For Logic VDD-VSS 4.8 5.0 5.3 V
Input High Volt. VIH 0.8 VDD VDD V
Input Low Volt. VIL GND 0.2 VDD V
Output High Volt. VOH IOH=-0.5mA 0.8 VDD VDD V
Output Low Volt. VOL IOL=0.5mA GND 0.2 VDD V
50% Check Board Operating Current IDD VDD=5V 60 90 mA
Top