2.4 Graphics OLED Display 100x16 - REG010016D
2.4 Graphics OLED Display 100x16 - REG010016D
2.4 Graphics OLED Display 100x16 - REG010016D
2.4 Graphics OLED Display 100x16 - REG010016D
2.4 Graphics OLED Display 100x16 - REG010016D

2.4" Graphics OLED Display 100x16

Model No. REG010016D

REG010016D is a dot matrix 100x16 COB graphic type OLED module. The size of the active area is 2.4” diagonal with module dimension 85.0x30.0 mm. This 2.4 inches OLED module has built-in IC RS0010-TX, and boasts high contrast ratio 10,000 : 1. There are many interface options to choose from, including 6800, 8080 interface. Logic supply voltage ranges from 4.8V-5.3V, the typical value is 5V. The available emitting colors are white, yellow, green, blue and red.

Data source ref: REG010016DWPP5N00100

Inquiry or Demo Code Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Structure COB
Size (Diagonal) 2.4 inch
Dot Matrix / Resolution 100 × 16 dots
Module Dimension 85.0 × 30.0 × 10.0 (MAX) mm
Viewing Area 66.0 × 16.0 mm
Active Area 59.95 × 11.15 mm
Dot / Pixel Size 0.55 × 0.65 mm
Dot / Pixel Pitch 0.60 × 0.70 mm
Emitting Color OLED, White / Yellow / Green / Blue / Red
IC RS0010-TX
Interface 6800, option 8080
Power Supply 5V
Duty 1/16 duty cycle
Operating Temperature -40~+80 °C
Storage Temperature -40~+85 °C
Polarizer Type Polarizer optional
Type OLED Graphic Display
Pin No. Symbol Level Description
1 VDD 5.0V Supply Voltage for logic
2 VSS 0V Ground
3 NC － No Connection
4 RS H/L H: DATA, L: Instruction code
5 R/W H/L H: Read(Module→MPU) L: Write(MPU→Module)
6 E H,H→L Chip enable signal
7 DB0 H/L Data bit 0
8 DB1 H/L Data bit 1
9 DB2 H/L Data bit 2
10 DB3 H/L Data bit 3
11 DB4 H/L Data bit 4
12 DB5 H/L Data bit 5
13 DB6 H/L Data bit 6
14 DB7 H/L Data bit 7

2.4 Graphics OLED Display 100x16 - REG010016D

Item Symbol Min Max Unit
Operating Temperature TOP -40 +80 °C
Storage Temperature TST -40 +85 °C
Supply Voltage For Logic VDD-VSS -0.3 5.3 V

DC Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For Logic VDD-VSS － 4.8 5.0 5.3 V
Input High Volt. VIH － 0.8xVDD － VDD V
Input Low Volt. VIL － GND － 0.2xVDD V
Output High Volt. VOH IOH=-0.5mA 0.8xVDD － VDD V
Output Low Volt. VOL IOL=0.5mA GND － 0.2xVDD V
50% Check Board Operating Current IDD VDD=5V － 45 67.5 mA

Related Products

Top