15 inch 1024x768 IPS LVDS TFT LCD Display

Model No. RFM1500A-AYW-LNN

RFM1500A-AYW-LNN is a 1024x768 dots, 15-inch diagonal, IPS TFT display. The module dimension is 326.5×253.5 mm; active area 304.1×228.1 mm. This 15-inch display module uses IPS screen which allows users to see the display clearly at wider angles. IPS technique allows viewers to view the screen from wider angles (88/88/88/88 degree).

This display also boasts its brightness 300 nits at typical value, with high contrast ratio (typical value) 2000:1. With the help of a anti-glare display surface, the screen doesn’t reflect light and preserves better image quality.

This module supporting LVDS Interface (Low Voltage Differential Signaling). The transmission technology is mainly developed to reduce the shortcomings of high power consumption and large EMI electromagnetic interference when transmitting broadband at high bit rate, so that it can effectively achieve low noise and low power consumption.

The power supply voltage of RFM1500A-AYW-LNN ranges from 3.0V to 3.6V; typical value is 3.3V. The module works within temperature range from -20℃ to +70℃; storage temperature is -30℃ to +70℃.

Inquiry or Demo Code Datasheet Back Next

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
TFT Series	IPS TFT LCD, LVDS TFT Display
Size (Diagonal)	15	inch
Dot Matrix / Resolution	1024 × RGB × 768	dots
Module Dimension	326.5 × 253.5 × 9.1	mm
Active Area	304.1 × 228.1	mm
Dot / Pixel Pitch	0.297 × 0.297	mm
LCD Type	TFT, Normally Black, Transmissive
View Direction	88/88/88/88 (IPS)
Backlight Type	LED, Normally White
Control Board	No
IC	--
Interface	LVDS
Touch Panel	Without Touch Panel
Surface	Anti-Glare
Brightness	300	cd/㎡
Mounting Hole	No
Operating Temperature	-20~+70	°C
Storage Temperature	-30~+70	°C

LCM PIN Definition

Pin No.	Symbol	Function	Polarity
1	VCC	Power Supply +3.3V(typical)
2	VCC	Power Supply +3.3V(typical)
3	NC	No Conncetion (Reserve for INX test)
4	LR/UD	Reverse Scan Control H or NC = Normal Mode. L = Horizonta/ Vertical Reverse Scan.
5	RX0-	LVDS Differential Data Input	Negative
6	RX0+	LVDS Differential Data Input	Positive
7	GND	Ground
8	RX1-	LVDS Differential Data Input	Negative
9	RX1+	LVDS Differential Data Input	Positive
10	NC	No Conncetion (Reserve for INX test)
11	RX2-	LVDS Differential Data Input	Negative
12	RX2+	LVDS Differential Data Input	Positive
13	GND	Ground
14	RXCLK-	LVDS Differential Data Input	Negative
15	RXCLK+	LVDS Differential Data Input	Positive
16	GND	Ground
17	RX3-	LVDS Differential Data Input	Negative
18	RX3+	LVDS Differential Data Input	Positive
19	NC	No Conncetion (Reserve for INX test)
20	SEL68	LVDS 6/8 bit select function control, High → 6bit Input Mode Low or NC→ 8bit Input Mode

15 inch 1024x768 IPS LVDS TFT LCD Display - RFM1500A-AYW-LNN

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+70	℃

Parameter		Symbol	Value			Unit
Parameter		Symbol	Min.	Typ.	Max.	Unit
Power Supply Voltage		VCC	3.0	3.3	3.6	V
Ripple Voltage		VRP	-	-	100	mVp-p
Rush Current		IRUSH	-	-	2.0	A
Power Supply Current	White	lcc	-	550	660	mA
Power Supply Current	Black	lcc	-	440	530	mA
LVDS differential input voltage		Vid	200	-	600	mV
LVDS common input voltage		Vic	1.0	1.2	1.4	V
Differential Input Voltage for LVDS Receiver Threshold	“H” Level	VIH	-	-	100	mV
Differential Input Voltage for LVDS Receiver Threshold	“L” Level	VIL	-100	-	-	mV
Terminating Resistor		RT	-	100	-	Ohm