- General Specs
- Interface Pin Function
- Contour Drawing
- Absolute Maximum Ratings
- Electrical Characteristics
| Item | Dimension | Unit |
|---|---|---|
| TFT Series | IPS TFT LCD,Wide Temperature TFT LCD,Wide View TFT,High Brightness TFT LCD | |
| Size (Diagonal) | 4 | inch |
| Dot Matrix / Resolution | 480 × 3 (RGB) × 480 | dots |
| Module Dimension | 78.8 (H) × 82.95 (W) × 7.17 | mm |
| Active Area | 71.856 (H) × 70.176 (V) | mm |
| Dot / Pixel Pitch | 0.1497 (H) × 0.1462 (V) | mm |
| LCD Type | TFT, Normally Black, Transmissive | |
| View Direction | 80/80/80/80 (IPS) | |
| Aspect Ratio | 1:1 | |
| Backlight Type | LED, Normally White | |
| Control Board | No | |
| Power Board | No | |
| TFT Driver IC | ST7701S | |
| Interface | 3-wire SPI+24-bit RGB | |
| PCAP FW Version | V01 | |
| PCAP IC | ST1633I | |
| PCAP Interface | I2C | |
| Detect Points | 5 | Points |
| Touch Panel | Projected Capacitive Touch Screen, PCAP | |
| Surface | Anti-Glare | |
| Brightness | 800 | cd/㎡ |
| O-Film | No | |
| Operating Temperature | -30~+80 | °C |
| Storage Temperature | -30~+80 | °C |
3-wire SPI and 24-bit RGB Interface for LCD 4-inch Module
| Pin No. | Symbol | Function |
|---|---|---|
| 1 | VLED- | Power for LED backlight cathode |
| 2 | VLED+ | Power for LED backlight anode |
| 3 | GND | Power ground |
| 4 | VCC | Power supply |
| 5 | R0 | Data bus |
| 6 | R1 | |
| 7 | R2 | |
| 8 | R3 | |
| 9 | R4 | |
| 10 | R5 | |
| 11 | R6 | |
| 12 | R7 | |
| 13 | G0 | Data bus |
| 14 | G1 | |
| 15 | G2 | |
| 16 | G3 | |
| 17 | G4 | |
| 18 | G5 | |
| 19 | G6 | |
| 20 | G7 | |
| 21 | B0 | Data bus |
| 22 | B1 | |
| 23 | B2 | |
| 24 | B3 | |
| 25 | B4 | |
| 26 | B5 | |
| 27 | B6 | |
| 28 | B7 | |
| 29 | SCL | SCL: Serial clock input for SPI interface. |
| 30 | PCLK | Dot clock signal for RGB interface operation |
| 31 | CS | - A chip select signal Low: the chip is selected and accessible High: the chip is not selected and not accessible |
| 32 | HSYNC | Line synchronizing signal for RGB interface operation |
| 33 | VSYNC | Frame synchronizing signal for RGB interface operation |
| 34 | DE | Data enable signal for RGB interface operation Low: access enabled High: access inhibited |
| 35 | SDA | SDA: Serial data input/output bidirectional pin for SPI Interface. |
| 36 | RESET | - The external reset input - Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power. |
| 37-40 | NC | No connect |
PCAP Pin Definition
| Pin No. | Symbol | Function |
|---|---|---|
| 1 | VSS | Ground for analog circuit |
| 2 | VDDT | Power Supply : +3.0V |
| 3 | SCL | I2C clock input |
| 4 | NC | No connect |
| 5 | SDA | I2C data input and output |
| 6 | NC | No connect |
| 7 | /RST | External Reset, Low is active |
| 8 | NC | No connect |
| 9 | /INT | External interrupt to the host |
| 10 | VSS | Ground for analog circuit |
Mechanical Dimensions of 4-inch LCD Display Module

Operating and Storage Limits for LCD 4-inch TFT Module
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -30 | - | +80 | ℃ |
| Storage Temperature | TST | -30 | - | +80 | ℃ |
Typical Operation Conditions
| Item | Symbol | Values | Unit | ||
|---|---|---|---|---|---|
| Min | Typ | Max | |||
| Interface Supply Voltage | VCC | 2.5 | 2.8 | 3.6 | V |
| Current for Driver (White) | IVCC | - | 27 | 40.5 | mA |
| Supply PCAP | VDDT | 2.8 | - | 3.3 | V |
| ICTP(mA) | - | 12.4 | 18.6 | mA | |
Backlight Driving Conditions
| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| LED Current | ILED | - | 120 | - | mA |
| LED Voltage | VLED+ | 13.5 | 15 | 17 | V |
| LED Life Time | - | 50,000 | - | - | Hr |









