Monochrome Graphic LCD Display 122x32

Model No. RG12232B2

RG12232B/ RG12232B2 series are graphic LCD display modules. Both of series share the same module dimension 65.4 x 28.2 mm, and are with built-in controller IC supporting 6800 interface. If you need Chinese fonts, please choose RG12232B3 series

RC12232B/ RG12232B2 series monochrome 122x32 LCD module uses voltage 5V and 2KHz internal oscillator. The module operating temperature ranges from -20°C to +70°C; storage temperature covers from -30°C to +80℃. There are many combinations for LED backlight and LCD mode for you to choose from.

Data source ref: RG12232B2-YHY-X

Inquiry or Demo Code Datasheet Back Previous Next

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
Structure	COB
Size (Diagonal)	2.00	inch
Dot Matrix / Resolution	122 × 32	dots
Module Dimension	65.4 × 28.2 × 6.8 (Max)	mm
Viewing Area	54.8 × 19.0	mm
Active Area	48.76 × 14.36	mm
Dot / Pixel Size	0.36 × 0.41	mm
Dot / Pixel Pitch	0.40 × 0.45	mm
IC	AIP315
Interface	6800
Power Supply	5V only
Duty	1/32 duty cycle
Chinese Version	RG12232B3
Type	Graphics LCD Display
Feature	Available for internal oscillation 2KHz The feature of RG12232B2 is same as RG12232B

Pin No.	Symbol	Level	Description
1	VDD	5.0V	Supply voltage for logic
2	VSS	0V	Ground
3	Vo	(Variable)	Operating voltage for LCD
4	RES	H/L	Reset the LCD display , active “ L “
5	E1	H/L	Chip select signal for IC1 ,active “ H “
6	E2	H/L	Chip select signal for IC2 , active “ H “
7	R/W	H/L	H : Read ; L : Write
8	A0	H/L	H : Data L : Instruction
9	DB0	H/L	Data bus line
10	DB1	H/L	Data bus line
11	DB2	H/L	Data bus line
12	DB3	H/L	Data bus line
13	DB4	H/L	Data bus line
14	DB5	H/L	Data bus line
15	DB6	H/L	Data bus line
16	DB7	H/L	Data bus line
17	A	－	Power Supply for LED backlight ( + )
18	K	－	Power Supply for LED backlight ( - )

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃
Input Voltage	VI	-0.3	－	VDD+0.3	V
Supply Voltage For Logic	VDD-VSS	-0.3	－	+6.0	V
LCD Bias Voltage	VLCD	3.5	－	13	V

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage For Logic	VDD-VSS	－	4.5	5.0	5.5	V
Supply Voltage For LCD	VDD-V0	Ta=-20℃ Ta=25℃ Ta=+70℃	－ 4.6 4.2	－ 4.7 －	5.3 4.8 －	V V V
Input High Volt	VIH	VDD =5.0	3.0	5.0	VDD+0.5	V
Input Low Volt	VIL	－	0	0.7	1.1	V
Output High Volt	VOH	－	VDD-0.3	－	VDD	V
Output Low Volt	VOL	－	0	－	0.3	V
Supply Current	IDD	VDD=5.0V	－	1.0	－	mA