RFM01030A2AABWSNN00 - 1.03-inch MiP Display Module - Raystar
RFM01030A2AABWSNN00 - 1.03-inch MiP Display Module - Raystar

1.03-inch 128x128 SPI MiP Display Module

Model No. RFM01030A2AABWSNN00

The RFM01030A2AABWSNN00 is a 1.03-inch reflective active-matrix Memory-in-Pixel (MiP) MiP display module. The panel provides a 128 × 128 pixel resolution, where each pixel integrates 1-bit memory, allowing the pixel to retain its display state without continuous refreshing. Display control is performed through serial data signal communication, supporting flexible panel driving and selective display updates.

The panel supports arbitrary line data updates with integrated pixel memory storing display data within each pixel, enabling the display to maintain static images while minimizing refresh requirements. The module adopts a thin, lightweight, and compact monolithic structure with a super-low-power TFT panel design, HardCoat (HC) front polarizer treatment, and an FPC interface. The outline dimension is 24.29 (W) × 28.66 (H) × 1.78 (D) mm with a maximum mass of 2.3 g (with backlight).

For technical support or product quotations regarding the RFM01030A2AABWSNN00 or MiP Display Module, please feel free to contact our sales team!

Inquiry or Demo Code Datasheet Back Next
  • General Specs
  • Input Terminal Names and Functions
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Size (Diagonal) 1.03 inch
Dot Matrix / Resolution 128 × 128 dots
Module Dimension 24.29 (W) × 28.66 (H) × 1.78 (D) mm
Active Area 18.56 × 18.56 mm
Dot / Pixel Pitch 0.145 × 0.145 mm
LCD Type TFT, Normally White, Reflective
Display Mode MIP (Memory in Pixel)
View Direction 8 o’clock
Viewing Angle 60 / 60 / 60 / 60
Gray Scale Inversion Direction 2 o’clock
Aspect Ratio Square
Backlight Type LED, Normally White
Control Board No
Power Board No
IC --
Interface SPI
Detect Points No Points
Touch Panel Without Touch Screen
Surface Front Polarizer (HardCoat)
Brightness -- cd/㎡
O-Film No
Operating Temperature -20~+70 °C
Storage Temperature -30~+80 °C

Pin Description

Terminal Symbol I／O Configurations Function
1 SCLK INPUT NoPull Serial clock signal
2 SI INPUT NoPull Serial data input signal
3 SCS INPUT NoPull Chip select signal ( Active of Hi )
4 EXTCOMIN INPUT NoPull External COM inversion signal input ( Square wave )
5 DISP INPUT NoPull Display ON/OFF signal
6 VDDA POWER — Power supply (Analog)
7 VDD POWER — Power supply (Digital)
8 EXTMODE INPUT NoPull Control mode of COM inversion is select terminal
9 VSS GND — GND (Digital)
10 VSSA GND — GND (Analog)

Input Signal States

Symbol I/O Voltage (V) Boot (Update & Hold mode) Standby
SCLK Input 0 / 3.0 Lo Hi / Lo ( Enter clk ) Lo
Hi / Lo ( Enter clk )
SI Input 0 / 3.0 Lo Hi / Lo ( Enter data ) Lo
Hi / Lo ( Enter data )
SCS Input 0 / 3.0 Lo Hi ( Enter data ) Lo
Hi / Lo ( Enter data )
EXTCOMIN Input 0 / 3.0 Lo Hi / Lo ( Input pulse (CLK) Signal. ) Hi / Lo ( Input pulse (CLK) Signal. )
Lo Lo
DISP Input 0 / 3.0 Lo Hi / ( Lo ) Hi / ( Lo )
EXTMODE Input 0 / 3.0 Hi / Lo ( Change is not permitted )

RFM01030A2AABWSNN00 Contour Drawing - 1.03-inch MiP Display Module - Raystar

Item Symbol Terminal Min Max Unit
Power Supply Voltage V_VDDA VDDA -0.3 +3.6 V
V_VDD VDD -0.3 +3.6 V
V_VSS VSS, VSSA 0 0 V
Input Signal Voltage High Level V_IH SCLK, SI, SCS DISP, EXTCOMIN EXTMODE — VDD V
Low Level V_IL -0.3 — V
Storage Temperature Tstg — -30 + 80 ℃
Operation Temperature (at panel surface) Topr — -20 + 70 ℃

TFT LCD Panel Drive

Item Symbol Terminal Min Typ Max Unit
Power Supply Voltage VVDDA VDDA +2.7 +3.0 +3.3 V
VVDD VDD +2.7 +3.0 +3.3 V
VVSS VSS, VSSA 0 0 0 V
Input Signal Voltage High Level VIH SCLK, SI ,SCS DISP ,EXTCOMIN VDD－0.1 VDD VDD V
EXTMODE VDD VDD VDD V
Low Level VIL SCLK ,SI ,SCS DISP ,EXTCOMIN EXTMODE VSS VSS VSS+0.1 V

LED Driving Conditions

Parameter Symbol Min Typ Max Unit Rremark
LED Current ILED - 20 - mA -
LED Voltage VLED 2.4 2.8 3.2 V -
Power Consumption PBL - 0.056 - W ILED=20mA
LED Life Time - 50,000 - - H ILED=20mA

Related Products

Top