RFM01080A2AAJWSNN00 - 1.08-inch MiP Display Module - Raystar
RFM01080A2AAJWSNN00 - 1.08-inch MiP Display Module - Raystar

1.08-inch 160x68 SPI MiP Display Module

Model No. RFM01080A2AAJWSNN00

The RFM01080A2AAJWSNN00 is a 1.08-inch 160×68 Memory-in-Pixel (MiP) display module. Each pixel integrates 1-bit internal memory, allowing the display to retain image data within the pixel and maintain the display state without continuous refreshing. Display control is performed through serial data signal communication, enabling arbitrary line data updates and flexible panel driving.

With the Memory-in-Pixel architecture, display data is stored within each pixel so the panel only requires updates when image content changes. This structure reduces the need for continuous refresh driving and helps lower system processing load and power consumption for static images. The module adopts a normally white reflective structure with slight transmissive characteristics, with an active area of 25.28 × 10.744 mm and module dimensions of 34.84 × 16.17 × 2.08 mm.

For technical support or product quotations regarding the RFM01080A2AAJWSNN00 or MiP display modules, please feel free to contact our sales team!

Inquiry or Demo Code Datasheet Back Previous
  • General Specs
  • Input Terminal Names and Functions
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Size (Diagonal) 1.08 inch
Dot Matrix / Resolution 160 × 68 dots
Module Dimension 34.84 (W) × 16.17 (H) × 2.08 (D) mm
Active Area 25.28 × 10.744 mm
Dot / Pixel Pitch 0.158 × 0.158 mm
LCD Type TFT, Normally White, Reflective
Display Mode MIP (Memory in Pixel)
View Direction 6 o’clock
Viewing Angle 60 / 60 / 60 / 60
Gray Scale Inversion Direction 12 o’clock
Aspect Ratio Square
Backlight Type LED, Normally White
Control Board No
Power Board No
IC --
Interface SPI
Detect Points No Points
Touch Panel Without Touch Screen
Surface Front Polarizer (HardCoat)
Brightness -- cd/㎡
O-Film No
Operating Temperature -20~+70 °C
Storage Temperature -30~+80 °C

Pin Description

Terminal Symbol I／O Configurations Function
1 SCLK INPUT NoPull Serial clock signal
2 SI INPUT NoPull Serial data input signal
3 SCS INPUT NoPull Chip select signal ( Active of Hi )
4 EXTCOMIN INPUT NoPull External COM inversion signal input ( Square wave )
5 DISP INPUT NoPull Display ON/OFF signal
6 VDDA POWER — Power supply (Analog)
7 VDD POWER — Power supply (Digital)
8 EXTMODE INPUT NoPull Control mode of COM inversion is select terminal
9 VSS GND — GND (Digital)
10 VSSA GND — GND (Analog)

Input Signal States

Pin No. Symbol I/O Voltage (V) Boot (Update & Hold mode) Standby
1 SCLK Input 0 / 3.0 Lo Hi / Lo ( Enter clk ) Lo
Hi / Lo ( Enter clk )
2 SI Input 0 / 3.0 Lo Hi / Lo ( Enter data ) Lo
Hi / Lo ( Enter data )
3 SCS Input 0 / 3.0 Lo Hi ( Enter data ) Lo
Hi / Lo ( Enter data )
4 EXTCOMIN Input 0 / 3.0 Lo Hi / Lo ( Input pulse (CLK) Signal. ) Hi / Lo ( Input pulse (CLK) Signal. )
Lo Lo
5 DISP Input 0 / 3.0 Lo Hi / ( Lo ) Hi / ( Lo )
8 EXTMODE Input 0 / 3.0 Hi / Lo ( Change is not permitted )

RFM01080A2AAJWSNN00 Contour Drawing - 1.03-inch MiP Display Module - Raystar

Item Symbol Min Max Unit
Power Supply Voltage Analog VDDA -0.3 +3.6 V
Logic VDD -0.3 +3.6 V
Input Signal Voltage (Hi) VHI — VDD V
Input Signal Voltage (Lo) VLI -0.3 — V
Strage Temperature Tstg -30 + 80 ℃
Operation Temperature (at panel surface) Topr -20 + 70 ℃

TFT LCD Panel Drive

Item Symbol Min Typ Max Unit
Power Supply Voltage Analog VDDA +2.7 +3.0 +3.3 V
Logic VDD +2.7 +3.0 +3.3 V
Input Signal Voltage High Level VIH VDD－0.1 VDD VDD V
Low Level VIL VSS VSS VSS+0.1 V

LED Driving Conditions

Parameter Symbol Min Typ Max Unit
LED Current ILED - 20 - mA
LED Voltage VLED 2.7 3.0 3.3 V
LED Life Time - 50,000 - - Hr

Related Products

Top