8.88 IPS , MIPI, TFT LCD Display Module 480x1920 - RF8880B-AYW-MNN
8.88 IPS , MIPI, TFT LCD Display Module 480x1920 - RF8880B-AYW-MNN

8.88" IPS , MIPI, TFT LCD Display Module 480x1920

Model No. RF8880B-AYW-MNN

RF8880B-AYW-MNN is a TN transmissive type color active matrix 8.88 -inch Bar TFT LCD display module with IPS panel; IPS technique allows viewers to view the screen from wider angles (85/85/85/85 degree). Its resolution is 480 x 1920 dots and 1:4 aspect ratio.

This TFT display supporting 4-lanes MIPI interface. MIPI (Mobile Industry Processor Interface) mainly used in mobile device applications. The MIPI TFT LCD module introduced by Raystar has a high-speed advantage compared to the RGB interface because the DSI (Display pixel interface) defines a high-speed serial interface between the main processor and the display module.

The module works within the temperature -20 to +70℃, storage temperature covers from-30 to +80℃. Power voltage ranges from 3.0V-3.6V; typical value is 3.3V. It’s brightness (typical value) is 600 cd/㎡, and contrast ratio (typical value) is 800:1.

Inquiry or Demo Code Datasheet Back Previous
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
TFT Series Standard TFT, Bar Type TFT, IPS TFT LCD
Size (Diagonal) 8.88 inch
Dot Matrix / Resolution 480 × R.G.B. × 1920 dots
Module Dimension 231.3 × 64.3 × 6.1 mm
Active Area 218.88 × 54.72 mm
Dot / Pixel Pitch 0.114 × 0.114 mm
LCD Type TFT, Normally Black, Transmissive
View Direction IPS
Viewing Angle 85/85/85/85
Aspect Ratio 1:4
Backlight Type LED, Normally White
Control Board No
TFT Driver IC OTA7290B or Equivalent
Interface 4-Lanes MIPI
Touch Panel Without Touch Screen
Surface Glare
Brightness 600 cd/㎡
Mounting Hole No
Operating Temperature -20~+70 °C
Storage Temperature -30~+80 °C

LCM PIN Definition

Pin No. Symbol I/O Function
1 GND P Ground
2 NC --- No connection
3 LED+ P LED Anode
4 LED+ P LED Anode
5 NC --- No connection
6 LED- P LED Cathode
7 LED- P LED Cathode
8 NC --- No connection
9 GND P Ground
10 NC --- No connection
11 AVDD P Power supply for analog circuit
12 NC --- No connection
13 VGH P Power supply for analog circuit
14 NC --- No connection
15 VGL P Power supply for analog circuit
16 NC --- No connection
17 GND P Ground
18 VCOM P Power supply for common voltage
19 GND P Ground
20 GND P Ground
21 RESET I Global reset
22 VDD P Power supply for digital circuits
23 STBYB I Standby mode
24 TP_Sync O Sync signal for touch panel
25 GND P Ground
26 D0P I MIPI Data Input Lane0 positive-end
27 D0N I MIPI Data Input Lane0 negtive-end
28 GND P Ground
29 D1P I MIPI Data Input Lane1 positive-end
30 D1N I MIPI Data Input Lane1 negtive-end
31 GND P Ground
32 CLKP I MIPI Clock Input positive-end
33 CLKN I MIPI Clock Input negtive-end
34 GND P Ground
35 D2P I MIPI Data Input Lane2 positive-end
36 D2N I MIPI Data Input Lane2 negtive-end
37 GND P Ground
38 D3P I MIPI Data Input Lane3 positive-end
39 D3N I MIPI Data Input Lane3 negtive-end
40 GND P Ground

8.88 inch IPS , MIPI, TFT LCD Display Module 480x1920 - RF8880B-AYW-MNN

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Operating conditions

Item Symbol Min Typ Max Unit
Supply Voltage VDD 3.0 3.3 3.6 V
VGH 17.0 18.0 19.0 V
VGL -11 -10 -9 V
AVDD 11.8 12 12.2 V
VCOM VCOM 4.5 4.88 5.2 V
Input signal voltage ViH 0.7 VDD - VDD V
ViL 0 - 0.3 VDD V
Current of power supply IDD - - 35 mA
IADD - - 30 mA
IGH - - 5 mA
IGL - - -5 mA
Ivcom - - 0.1 mA
Top