- General Specs
- Interface Pin Function
- Contour Drawing
- Absolute Maximum Ratings
- Electrical Characteristics
| Item | Dimension | Unit |
|---|---|---|
| Structure | COB | |
| Size (Diagonal) | 5.67 | inch |
| Dot Matrix / Resolution | 320 × 240 | dots |
| Module Dimension | 160.0 × 109.0 × 13.0 (MAX) | mm |
| Viewing Area | 122.0 × 92.0 | mm |
| Active Area | 115.18 × 86.38 | mm |
| Mounting Hole | 152.0 × 101.0 | mm |
| Dot / Pixel Size | 0.33 × 0.33 | mm |
| Dot / Pixel Pitch | 0.36 × 0.36 | mm |
| IC | S1D13700 or Equivalent | |
| Interface | 6800 / 8080 | |
| Power Supply | Built-in Negative voltage generator | |
| Duty | 1/240 duty cycle | |
| Type | Graphics LCD Display | |
| Feature | Touch screen option (analog type) Temperature compensation option DIP Connection,20 pins |
For 80 family
| Pin No. | Symbol | Level | Description |
|---|---|---|---|
| 1 | VSS | 0V | Ground |
| 2 | VDD | 5.0V | Power supply for Logic |
| 3 | VO | (Variable) | Driving voltage for LCD |
| 4 | — WR |
H/L | 8080 family: Write signal, 6800 family: R/W signal |
| 5 | — RD |
H/L | 8080 family: Read signal, 6800 family: Enable clock |
| 6 | CS | H/L | Chip select ,Active L |
| 7 | A0 | H/L | RD=L WR=H ,A0=L :Data Read AO=H :Status read RD=H WR=L ,A0=L :Data Write AO=H :Command write |
| 8 | RES | H/L | Controller reset signal, Active L |
| 9~16 | DB0~DB7 | H/L | Data bus |
| 17 | VEE | Negative voltage output | |
| 18 | NC | No connection | |
| 19 | WAIT | Check busy | |
| 20 | A | Power supply for B/L + |

| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -20 | - | +70 | ℃ |
| Storage Temperature | TST | -30 | - | +80 | ℃ |
| Input Voltage | VIN | -0.3 | - | VDD+0.5 | V |
| Output Voltage | VOUT | -0.3 | - | VDD+0.5 | V |
| Supply Voltage For Logic | VDD-VSS | 0 | - | 6.5 | V |
| Supply Voltage For LCD | VDD-V0 | 0 | - | 32 | V |
| Item | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage For Logic | VDD-VSS | - | 4.5 | 5.0 | 5.5 | V |
| Supply Voltage For LCD | VDD-V0 | Ta=-20℃ Ta=25℃ Ta=70℃ |
- 23.0 21.8 |
- 23.6 - |
26.1 24.2 - |
V V V |
| Input High Volt. | VIH | - | 3.5 | - | - | V |
| Input Low Volt. | VIL | - | - | - | 1.0 | V |
| Output High Volt. | VOH | - | VDD-0.4 | - | - | V |
| Output Low Volt. | VOL | - | - | - | 0.4 | V |
| Supply Current | IDD | VDD=5.0V | 90 | 100 | 110 | mA |










