RFF700D3-AIW-DNG - 7-inch TFT LCD Module with PCAP

7-inch 800x480 RGB TFT LCD Module with PCAP (ILI6137A+ILI5960-9G IC)

Model No. RFF700D3-AIW-DNG

The RFF700D3-AIW-DNG is a 7-inch 800×480 RGB Transmissive TFT LCD Module with Projected Capacitive Touch Panel (PCAP). Designed with a 16:9 aspect ratio and glare surface, it delivers sharp and clear image quality with a brightness of 300 cd/m². The module integrates ILI6137A + ILI5960-9G TFT driver ICs with a 24-bit RGB interface, while the ILI2130 PCAP controller (I²C) ensures smooth and accurate touch performance.

Engineered for durability, the RFF700D3-AIW-DNG supports wide temperature operation (-20°C to +70°C) and offers a long LED backlight lifetime of up to 50,000 hours. Its robust design makes it an excellent solution for industrial controls, embedded systems, and HMI applications that demand dependable performance in challenging environments.

Contact our sales team today to learn more about integrating the RFF700D3-AIW-DNG into your next project or request a customized solution tailored to your needs!

Inquiry or Demo Code

Datasheet

Back

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
TFT Series	Standard TFT,Wide Temperature TFT
Size (Diagonal)	7	inch
Dot Matrix / Resolution	800 × RGB × 480 (TFT)	dots
Module Dimension	165.0 × 100.0 × 7.4	mm
Active Area	154.08 × 85.92	mm
Dot / Pixel Pitch	0.1926 × 0.179	mm
LCD Type	TFT, Normally White, Transmissive
View Direction	12 o’clock
Gray Scale Inversion Direction	6 o’clock
Aspect Ratio	16:9
Backlight Type	LED, Normally White
Control Board	No
Power Board	No
TFT Driver IC	ILI6137A+ILI5960-9G
Interface	24-bit RGB
PCAP FW Version	0x07.0x00.0x00.0x00.0x65.0x90.0x00.0x01
PCAP IC	ILI2130
PCAP Interface	I2C
PCAP Resolution	16384 × 16384
Detect Points	5	Points
Color arrangement	RGB-STRIPE
Touch Panel	Projected Capacitive Touch Panel, PCAP
Surface	Glare
Brightness	300	cd/㎡
O-Film	No
Operating Temperature	-20~+70	°C
Storage Temperature	-30~+80	°C

LCM PIN Definition

Pin No.	Symbol	Function
1	VLED+	Power supply for backlight
2	VLED+	Power supply for backlight
3	VLED-	Backlight ground
4	VLED-	Backlight ground
5	GND	Power ground
6	VCOM	Common voltage
7	VCC	Power for Digital Circuit
8	MODE	DE/SYNC mode select
9	DE	Data Input Enable (DEN)
10	VS	Vertical Sync Input (VSD)
11	HS	Horizontal Sync Input (HSD)
12	B7	Blue data(MSB)
13	B6	Blue data
14	B5	Blue data
15	B4	Blue data
16	B3	Blue data
17	B2	Blue data
18	B1	Blue data
19	B0	Blue data(LSB)
20	G7	Green data(MSB)
21	G6	Green data
22	G5	Green data
23	G4	Green data
24	G3	Green data
25	G2	Green data
26	G1	Green data
27	G0	Green data(LSB)
28	R7	Red data(MSB)
29	R6	Red data
30	R5	Red data
31	R4	Red data
32	R3	Red data
33	R2	Red data
34	R1	Red data
35	R0	Red data(LSB)
36	GND	Power Ground
37	DCLK	Sample clock (CLK)
38	GND	Power Ground
39	L/R	Left / right selection
40	U/D	Up/down selection
41	VGH	Gate ON Voltage
42	VGL	Gate OFF Voltage
43	AVDD	Power for Analog Circuit
44	RESET	Global reset pin.
45	NC	No connection
46	VCOM	Common Voltage
47	DITHB	Dithering function
48	GND	Power Ground
49	NC	No connection
50	NC	No connection

PCAP PIN Definition

Pin No.	Symbol	Function
1	VSS	Ground for analog circuit
2	VDDT	Power Supply : +3.3V
3	SCL	I2C clock input
4	NC	No connect
5	SDA	I2C data input and output
6	NC	No connect
7	/RST	External Reset, Low is active
8	NC	No connect
9	/INT	External interrupt to the host
10	VSS	Ground for analog circuit

RFF700D3-AIW-DNG Contour Drawing - 7-inch TFT LCD Module with PCAP - Raystar

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Operating Conditions

Item	Symbol	Min	Typ	Max	Unit
Supply Voltage For Logic	VCC	3.0	3.3	3.6	V
Power Voltage	AVDD	10.2	10.4	10.6	V
Power Supply For Current	VCC =3.3V	-	3.1	-	mA
Power Voltage	VGH	14.5	15.0	15.5	V
Power Voltage	VGL	-10.5	-10	-9.5	V
Input Signal Voltage	VCOM	3.54	4.04	4.54	V
Power AVDD For Current	IADD	-	13.7	-	mA
Power VGH For Current	IGH	-	0.57	-	mA
Power VGL For Current	IGL	-	0.63	-	mA
Power VCOM For Current	ICOM	-	0.03	-	mA
Supply PCAP	VDDT	3.0	3.3	3.6	V
Supply PCAP	ICTP	-	65	98	mA